List of transferTo() Examples

Examples of transferTo()

com.facebook.presto.jdbc.internal.netty.channel.FileRegion.transferTo()
Transfers the content of this file region to the specified channel. @param target the destination of the transfer @param position the relative offset of the file where the transferbegins from. For example, 0 will make the transfer start from {@link #getPosition()}th byte and {@link #getCount()} - 1 will make the lastbyte of the region transferred.
com.facebook.presto.jdbc.internal.netty.channel.socket.nio.SocketSendBufferPool.SendBuffer.transferTo()
com.firefly.net.buffer.SocketSendBufferPool.SendBuffer.transferTo()
com.firefly.net.tcp.ssl.SSLSession.transferTo()
Perform a FileChannel.TransferTo on the socket channel.
We have to copy the data into an intermediary app ByteBuffer first, then send it through the SSLEngine.
We return the number of bytes actually read out of the filechannel. However, the data may actually be stuck in the fileChannelBB or the outNetBB. The caller is responsible for making sure to call dataFlush() before shutting down. @param fc to transfer FileChannel @param pos start position @param len length @return written length @throws Throwable A runtime exception
io.netty.channel.FileRegion.transferTo()
Transfers the content of this file region to the specified channel. @param target the destination of the transfer @param position the relative offset of the file where the transferbegins from. For example, 0 will make the transfer start from {@link #position()}th byte and {@link #count()} - 1 will make the lastbyte of the region transferred.
io.netty.channel.sctp.SctpSendBufferPool.SendBuffer.transferTo()
io.netty.channel.socket.nio.SocketSendBufferPool.SendBuffer.transferTo()
java.nio.channels.FileChannel.transferTo()
Transfers data from the file to the given channel. It may be very efficient. By invoking this methid, it will read form the file and write into the writable channel. Note: no guarantee whether all bytes may be transfered.And it does not modify the position of the channel. @param position the non-negative position to begin @param count the non-negative bytes to be transferred @param target the target channel to write into @return the number of bytes that were transferred. @throws IllegalArgumentException If the parameters are not correct @throws NonReadableChannelException If this channel is not readable @throws NonWritableChannelException If the target channel is not writable @throws ClosedChannelException If either channel has already been closed @throws AsynchronousCloseException If either channel is closed by other threads during this operation @throws ClosedByInterruptException If the thread is interrupted during this operation @throws IOException If any I/O error occurs
krati.core.segment.Segment.transferTo()
Transfers bytes to a target segment. @param pos - the segment position @param length - the number of bytes to read from the specified position @param targetSegment - the target segment to append to @return the number of bytes transferred @throws IOException
net.sf.laja.example.account.behaviour.SourceAccount.transferTo()
org.geowebcache.io.Resource.transferTo()
org.jboss.netty.channel.FileRegion.transferTo()
Transfers the content of this file region to the specified channel. @param target the destination of the transfer @param position the relative offset of the file where the transferbegins from. For example, 0 will make the transfer start from {@link #getPosition()}th byte and {@link #getCount()} - 1 will make the lastbyte of the region transferred.
org.jboss.netty.channel.socket.nio.SocketSendBufferPool.SendBuffer.transferTo()
org.springframework.web.multipart.MultipartFile.transferTo()
Transfer the received file to the given destination file.
This may either move the file in the filesystem, copy the file in the filesystem, or save memory-held contents to the destination file. If the destination file already exists, it will be deleted first.
If the file has been moved in the filesystem, this operation cannot be invoked again. Therefore, call this method just once to be able to work with any storage mechanism. @param dest the destination file @throws IOException in case of reading or writing errors @throws IllegalStateException if the file has already been movedin the filesystem and is not available anymore for another transfer
org.xsocket.connection.BlockingConnection.transferTo()
org.xsocket.connection.IBlockingConnection.transferTo()

Examples of java.nio.channels.FileChannel.transferTo()

    
    if (bodyDataSink.getFlushmode() != FlushMode.SYNC) {
      System.out.println("flush mode is not sync");
      Assert.fail("flush mode is not sync"); 
    }
    fc.transferTo(0, size, bodyDataSink);
    if (bodyDataSink.getFlushmode() != FlushMode.SYNC) {
      System.out.println("flush mode after copy is not sync");
      Assert.fail("flush mode after copy is not sync"); 
    }
    bodyDataSink.close();

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

    
    File file = QAUtil.createTestfile_40k();
    RandomAccessFile raf = new RandomAccessFile(file, "r");
    FileChannel fc = raf.getChannel();
    
    fc.transferTo(0, fc.size(), clientChannel);
    
    clientChannel.close();
    fc.close();
    raf.close();

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

    File file = QAUtil.createTestfile_40k();
    file.deleteOnExit();
    RandomAccessFile raf = new RandomAccessFile(file, "r");
    FileChannel fc = raf.getChannel();
    
    fc.transferTo(0, fc.size(), clientChannel);


    clientChannel.close();
    fc.close();
    raf.close();

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

    
    if (bodyDataSink.getFlushmode() != FlushMode.SYNC) {
      System.out.println("flush mode is not sync");
      Assert.fail("flush mode is not sync"); 
    }
    fc.transferTo(0, size, bodyDataSink);
    if (bodyDataSink.getFlushmode() != FlushMode.SYNC) {
      System.out.println("flush mode after copy is not sync");
      Assert.fail("flush mode after copy is not sync"); 
    }
    bodyDataSink.close();

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

    
    if (bodyDataSink.getFlushmode() != FlushMode.SYNC) {
      System.out.println("flush mode is not sync");
      Assert.fail("flush mode is not sync"); 
    }
    fc.transferTo(0, size, bodyDataSink);
    if (bodyDataSink.getFlushmode() != FlushMode.SYNC) {
      System.out.println("flush mode after copy is not sync");
      Assert.fail("flush mode after copy is not sync"); 
    }
    bodyDataSink.close();

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

        int safe_max = (64 * 1024 * 1024) / 4;
        long size = srcChannel.size();
        long position = 0;
        while (position < size)
        {
          position += srcChannel.transferTo(position, safe_max,
              dstChannel);
        }
      }


      // Close the channels

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

                long length = section.right - section.left;
                long bytesTransferred = 0;
                while (bytesTransferred < length)
                {
                    long toTransfer = Math.min(CHUNK_SIZE, length - bytesTransferred);
                    long lastWrite = fc.transferTo(section.left + bytesTransferred, toTransfer, channel);
                    bytesTransferred += lastWrite;
                    header.file.progress += lastWrite;
                }
                if (logger.isDebugEnabled())
                    logger.debug("Bytes transferred " + bytesTransferred + "/" + header.file.size);

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

                
                long bytesTransferred;
                try
                {
                    /* returns the number of bytes transferred from file to the socket */
                    bytesTransferred = fc.transferTo(startPosition, limit, socketChannel_);
                }
                catch (IOException e)
                {
                    // at least jdk1.6.0 on Linux seems to throw IOException
                    // when the socket is full. (Bug fixed for 1.7: http://bugs.sun.com/view_bug.do?bug_id=5103988)

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()


    try {


      // write out the checksum type and bytesperchecksum to client
      // skip the first two bytes that describe the version
      long val = mch.transferTo(versionSize, cheaderSize, out);
      if (val != cheaderSize) {
        String msg = "readBlockAccelerator for block  " + block +
                     " at offset " + 0 + 
                     " but could not transfer checksum header.";
        LOG.warn(msg);

View Full Code Here

Examples of java.nio.channels.FileChannel.transferTo()

      if (LOG.isDebugEnabled()) {
        LOG.debug("readBlockAccelerator metaOffset "  +  startMetaOffset + 
                  " mlength " +  metaLength);
      }
      // write out the checksums back to the client
      val = mch.transferTo(startMetaOffset, metaLength, out);
      if (val != metaLength) {
        String msg = "readBlockAccelerator for block  " + block +
                     " at offset " + startMetaOffset +
                     " but could not transfer checksums of size " +
                     metaLength + ". Transferred only " + val;

View Full Code Here

0 1 2 3 4 5 6

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.