List of doCommand() Examples

Examples of doCommand()

com.thoughtworks.selenium.webdriven.WebDriverCommandProcessor.doCommand()
commands.Command.doCommand()
org.apache.commons.net.ftp.FTPClient.doCommand()
Issue a command and wait for the reply.
Should only be used with commands that return replies on the command channel - do not use for LIST, NLST, MLSD etc.
@param command The command to invoke @param params The parameters string, may be {@code null} @return True if successfully completed, false if not, in which casecall {@link #getReplyCode()} or {@link #getReplyString()}to get the reason. @exception IOException If an I/O error occurs while either sending acommand to the server or receiving a reply from the server. @since 3.0
org.bladerunnerjs.plugin.CommandPlugin.doCommand()
Runs the command using the provided user arguments. @param args The list of arguments provided by the user. @return The exit code. 0 on success, non 0 otherwise. Typically commands will return 1 on failure unlessthey have multiple exit paths. The exit code is not a replacement for exceptions, exceptions should still be thrown if arguments are invalid or an unexpected exception occurs during the execution of the command. @throws CommandArgumentsException if any invalid arguments were provided. @throws CommandOperationException if a problem was encountered while running the command.
org.bladerunnerjs.plugin.plugins.commands.standard.JsDocCommand.doCommand()
org.eclipse.nebula.widgets.nattable.NatTable.doCommand()
org.eclipse.nebula.widgets.nattable.command.ILayerCommandHandler.doCommand()
@param targetLayer the target layer @param command the command @return true if the command has been handled, false otherwise
org.eclipse.nebula.widgets.nattable.grid.layer.DefaultGridLayer.doCommand()
org.eclipse.nebula.widgets.nattable.grid.layer.GridLayer.doCommand()
org.eclipse.nebula.widgets.nattable.layer.ILayer.doCommand()
Opportunity to respond to a command as it flows down the stack. If the layer is not interested in the command it should allow the command to keep traveling down the stack. Note: Before the layer can process a command it must convert the command to its local co-ordinates using {@link ILayerCommand#convertToTargetLayer(ILayer)} @param command the command to perform @return true if the command has been handled, false otherwise
org.eclipse.nebula.widgets.nattable.layer.stack.DummyGridLayerStack.doCommand()
org.eclipse.nebula.widgets.nattable.reorder.ColumnReorderLayer.doCommand()
org.eclipse.nebula.widgets.nattable.selection.SelectionLayer.doCommand()
org.eclipse.nebula.widgets.nattable.test.fixture.NatTableFixture.doCommand()
org.eclipse.nebula.widgets.nattable.test.fixture.layer.ColumnReorderLayerFixture.doCommand()
org.eclipse.nebula.widgets.nattable.test.fixture.layer.GridLayerFixture.doCommand()
org.groovymud.object.MudObject.doCommand()
org.openqa.selenium.server.FrameGroupCommandQueueSet.doCommand()
Schedules the specified command to be retrieved by the next call to handle command result, and returns the result of that command. @param command - the remote command verb @param arg - the first remote argument (meaning depends on the verb) @param value - the second remote argument @return - the command result, defined by the remote JavaScript. "getX" stylecommands may return data from the browser; other "doX" style commands may just return "OK" or an error message. @throws RemoteCommandException if a waitForLoad failed.

Examples of org.eclipse.nebula.widgets.nattable.layer.ILayer.doCommand()

    protected void setNewMinLength(ILayerCell cell, int contentHeight) {
        int cellLength = cell.getBounds().height;
        if (cellLength < contentHeight) {


            ILayer layer = cell.getLayer();
            layer.doCommand(new RowResizeCommand(layer, cell.getRowPosition(),
                    contentHeight));
        }
    }


    @Override

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.layer.ILayer.doCommand()


            int contentHeight = imageBounds.height;
            if (this.calculateByHeight && (contentHeight > bounds.height)) {
                int contentToCellDiff = (cell.getBounds().height - bounds.height);
                ILayer layer = cell.getLayer();
                layer.doCommand(new RowResizeCommand(
                        layer,
                        cell.getRowPosition(),
                        contentHeight + contentToCellDiff));
            }

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.layer.ILayer.doCommand()


            int contentWidth = imageBounds.width;
            if (this.calculateByWidth && (contentWidth > bounds.width)) {
                int contentToCellDiff = (cell.getBounds().width - bounds.width);
                ILayer layer = cell.getLayer();
                layer.doCommand(new ColumnResizeCommand(
                        layer,
                        cell.getColumnPosition(),
                        contentWidth + contentToCellDiff));
            }

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.layer.stack.DummyGridLayerStack.doCommand()

    public void autoResizeOneColumn() throws Exception {
        GridLayer gridLayer = new DummyGridLayerStack();
        setClientAreaProvider(gridLayer);


        // Resize column
        gridLayer.doCommand(new ColumnResizeCommand(gridLayer, 2, 10));
        assertEquals(10, gridLayer.getColumnWidthByPosition(2));


        // Auto resize the one column
        InitializeAutoResizeColumnsCommand command = new InitializeAutoResizeColumnsCommand(
                gridLayer, 2, configRegistry, gcFactory);

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.reorder.ColumnReorderLayer.doCommand()


    @Test
    public void commandPassedOnToParentIfCannotBeHandled() throws Exception {
        ColumnReorderLayer reorderLayer = new ColumnReorderLayer(
                new DataLayerFixture());
        assertFalse(reorderLayer.doCommand(new LayerCommandFixture()));
    }


    @Test
    public void canHandleColumnReorderCommand() throws Exception {
        ColumnReorderLayer reorderLayer = new ColumnReorderLayer(

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.reorder.ColumnReorderLayer.doCommand()

    public void canHandleColumnReorderCommand() throws Exception {
        ColumnReorderLayer reorderLayer = new ColumnReorderLayer(
                new DataLayerFixture());
        ColumnReorderCommand reorderCommand = new ColumnReorderCommand(
                reorderLayer, 0, 2);
        assertTrue(reorderLayer.doCommand(reorderCommand));
    }


    @Test
    public void getWidthForReorderedColumns() throws Exception {
        underlyingLayer = new DataLayerFixture();

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.reorder.ColumnReorderLayer.doCommand()

        ColumnReorderLayer reorderLayerFixture = new ColumnReorderLayerFixture(
                dataLayer);


        MultiColumnResizeCommand resizeCommand = new MultiColumnResizeCommand(
                reorderLayerFixture, new int[] { 1, 2 }, new int[] { 100, 150 });
        reorderLayerFixture.doCommand(resizeCommand);


        // As the Commands goes down the stack - positions might get converted
        // to entirely different values.
        Assert.assertEquals(-1, resizeCommand.getCommonColumnWidth());
        Assert.assertEquals(-1, resizeCommand.getColumnWidth(5));

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.selection.SelectionLayer.doCommand()

        assertEquals(10, gridLayer.getColumnWidthByPosition(2));


        // Fully select columns 1, 2
        SelectionLayer selectionLayer = ((DefaultBodyLayerStack) gridLayer
                .getBodyLayer()).getSelectionLayer();
        selectionLayer.doCommand(new SelectColumnCommand(selectionLayer, 0, 0,
                false, false));
        selectionLayer.doCommand(new SelectColumnCommand(selectionLayer, 1, 0,
                true, false));
        assertEquals(2, selectionLayer.getFullySelectedColumnPositions().length);

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.test.fixture.NatTableFixture.doCommand()

        assertEquals(1, natTableFixture.getColumnIndexByPosition(1));


        // Move to outside the visible range
        List<Integer> columnToMove = Arrays.asList(1, 2, 3);
        int destinationPosition = 10;
        natTableFixture.doCommand(new MultiColumnReorderCommand(
                natTableFixture, columnToMove, destinationPosition));


        // Ensure that the event propagates to the top
        assertEquals(1, listenerFixture.getEventsCount());
        assertNotNull(listenerFixture

View Full Code Here

Examples of org.eclipse.nebula.widgets.nattable.test.fixture.NatTableFixture.doCommand()

        natTableFixture.addLayerListener(listenerFixture);


        assertEquals(10, natTableFixture.getColumnCount());


        // hide some columns
        natTableFixture.doCommand(new MultiColumnHideCommand(natTableFixture,
                new int[] { 2, 5, 8 }));


        assertEquals(7, natTableFixture.getColumnCount());


        List<Integer> columnToMove = Arrays.asList(3, 4, 6, 7);

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.