List of writePacket() Examples

Examples of writePacket()

com.sun.messaging.jmq.io.Packet.writePacket()
Write a packet to a WritableByteChannel. This method may be used for blocking and non-blocking I/O. If you are using blocking I/O then you should specify "true" for 'block'. If you are using non-blocking then specify "false". Returns "true" if a complete packet has been written, else "false". If this method returns false then you may call it again (as many times as necessary) to try and complete the write. If 'block' is true, then the method will block until a complete packet is written.
com.sun.messaging.jmq.transport.httptunnel.HttpTunnelPacket.writePacket()
Write a packet to the given OutputStream.
com.xuggle.xuggler.IContainer.writePacket()
Writes the contents of the packet to the container.
If the current thread is interrupted while this blocking method is running the method will return with a negative value. To check if the method exited because of an interruption pass the return value to {@link IError#make(int)} and then check {@link IError#getType()} to see if it is {@link IError.Type#ERROR_INTERRUPTED}.
@param packet [In] The packet to write out. @param forceInterleave [In] If true, then this {@link IContainer} will make sure all packets are interleaved by DTS (even across streams in a container). If false, the {@link IContainer} won't, and it's up to the caller to interleave if necessary. @return # of bytes written if successful, or <0 if not.
jade.imtp.leap.JICP.Connection.writePacket()
Write a JICPPacket on the connection
jpcap.JpcapWriter.writePacket()
Saves a packet into the file. @param packet Packet to be saved
org.activemq.io.WireFormat.writePacket()
Writes the packet to the given output stream @param packet @param out @return a response packet - or null @throws IOException @throws JMSException
org.activemq.io.impl.AbstractPacketMarshaller.writePacket()
Write a Packet instance to data output stream @param p the instance to be seralized @param dataOut the output stream @throws IOException thrown if an error occurs
org.activemq.io.impl.DefaultWireFormat.writePacket()
org.apache.sshd.common.session.AbstractSession.writePacket()
Encode and send the given buffer. The buffer has to have 5 bytes free at the beginning to allow the encoding to take place. Also, the write position of the buffer has to be set to the position of the last byte to write. @param buffer the buffer to encode and send @return a future that can be used to check when the packet has actually been sent @throws java.io.IOException if an error occured when encoding sending the packet
org.bouncycastle.bcpg.BCPGOutputStream.writePacket()
org.bouncycastle2.bcpg.BCPGOutputStream.writePacket()
org.codehaus.activemq.io.WireFormat.writePacket()
Writes the packet to the given output stream @param packet @param out @return a response packet - or null @throws IOException @throws JMSException
org.codehaus.activemq.io.impl.DefaultWireFormat.writePacket()
Write a Packet to a DataOutput @param packet @param dataOut @throws IOException

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

            {
                if (ids.get(i) instanceof String)
                {
                    String    id = (String)ids.get(i);
                    
                    out.writePacket(new UserIDPacket(id));
                }
                else
                {
                    PGPUserAttributeSubpacketVector    v = (PGPUserAttributeSubpacketVector)ids.get(i);

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

                }
                else
                {
                    PGPUserAttributeSubpacketVector    v = (PGPUserAttributeSubpacketVector)ids.get(i);


                    out.writePacket(new UserAttributePacket(v.toSubpacketArray()));
                }
                
                if (idTrusts.get(i) != null)
                {
                    out.writePacket((ContainedPacket)idTrusts.get(i));

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

                    out.writePacket(new UserAttributePacket(v.toSubpacketArray()));
                }
                
                if (idTrusts.get(i) != null)
                {
                    out.writePacket((ContainedPacket)idTrusts.get(i));
                }
                
                List    sigs = (List)idSigs.get(i);
                for (int j = 0; j != sigs.size(); j++)
                {

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

        else
        {
            out = new BCPGOutputStream(outStream);
        }


        out.writePacket(secret);
        if (pub.trustPk != null)
        {
            out.writePacket(pub.trustPk);
        }

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

        }


        out.writePacket(secret);
        if (pub.trustPk != null)
        {
            out.writePacket(pub.trustPk);
        }
        
        if (pub.subSigs == null)        // is not a sub key
        {
            for (int i = 0; i != pub.keySigs.size(); i++)

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

            {
                if (pub.ids.get(i) instanceof String)
                {
                    String    id = (String)pub.ids.get(i);
                    
                    out.writePacket(new UserIDPacket(id));
                }
                else
                {
                    PGPUserAttributeSubpacketVector    v = (PGPUserAttributeSubpacketVector)pub.ids.get(i);

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

                }
                else
                {
                    PGPUserAttributeSubpacketVector    v = (PGPUserAttributeSubpacketVector)pub.ids.get(i);


                    out.writePacket(new UserAttributePacket(v.toSubpacketArray()));
                }
                
                if (pub.idTrusts.get(i) != null)
                {
                    out.writePacket((ContainedPacket)pub.idTrusts.get(i));

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

                    out.writePacket(new UserAttributePacket(v.toSubpacketArray()));
                }
                
                if (pub.idTrusts.get(i) != null)
                {
                    out.writePacket((ContainedPacket)pub.idTrusts.get(i));
                }
                
                List         sigs = (ArrayList)pub.idSigs.get(i);
                
                for (int j = 0; j != sigs.size(); j++)

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

        else
        {
            out = new BCPGOutputStream(outStream);
        }


        out.writePacket(sigPck);
        if (trustPck != null)
        {
            out.writePacket(trustPck);
        }
    }

View Full Code Here

Examples of org.bouncycastle.bcpg.BCPGOutputStream.writePacket()

        }


        out.writePacket(sigPck);
        if (trustPck != null)
        {
            out.writePacket(trustPck);
        }
    }
    
    private byte[] getEncodedPublicKey(
        PGPPublicKey pubKey)

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.