List of writeChar() Examples

Examples of writeChar()

com.higherfrequencytrading.chronicle.Excerpt.writeChar()
com.peterhi.obsolete.Stream.writeChar()
io.netty.buffer.ByteBuf.writeChar()
Sets the specified 2-byte UTF-16 character at the current {@code writerIndex} and increases the {@code writerIndex} by {@code 2}in this buffer. The 16 high-order bits of the specified value are ignored. @throws IndexOutOfBoundsException if {@code this.writableBytes} is less than {@code 2}
java.io.DataOutputStream.writeChar()
Writes the specified 16-bit character to the OutputStream. Only the lower 2 bytes are written with the higher of the 2 bytes written first. This represents the Unicode value of val. @param val the character to be written @throws IOException If an error occurs attempting to write to this DataOutputStream. @see DataInput#readChar()
java.io.ObjectOutput.writeChar()
java.io.ObjectOutputStream.writeChar()
Write primitive data of type char (value)into the receiver's underlying stream. @param value The primitive data to write @throws IOException If an IO exception happened when writing the primitive data.
java.io.RandomAccessFile.writeChar()
Writes the specified 16-bit character to the OutputStream. Only the lower 2 bytes are written with the higher of the 2 bytes written first. This represents the Unicode value of val. @param val the character to be written @throws IOException If an error occurs attempting to write to this DataOutputStream. @see DataInput#readChar()
javax.jms.BytesMessage.writeChar()
javax.jms.StreamMessage.writeChar()
net.minecraft.util.io.netty.buffer.ByteBuf.writeChar()
net.timewalker.ffmq3.common.message.BytesMessageImpl.writeChar()
net.timewalker.ffmq3.common.message.StreamMessageImpl.writeChar()
org.activemq.message.ActiveMQBytesMessage.writeChar()
Writes a char to the bytes message stream as a 2-byte value, high byte first. @param value the char value to be written @throws JMSException if the JMS provider fails to write the message due to some internal error. @throws MessageNotWriteableException if the message is in read-only mode.
org.activemq.message.ActiveMQStreamMessage.writeChar()
Writes a char to the stream message. @param value the char value to be written @throws JMSException if the JMS provider fails to write the messagedue to some internal error. @throws MessageNotWriteableException if the message is in read-onlymode.
org.apache.activemq.command.ActiveMQBytesMessage.writeChar()
Writes a char to the bytes message stream as a 2-byte value, high byte first. @param value the char value to be written @throws JMSException if the JMS provider fails to write the message dueto some internal error. @throws MessageNotWriteableException if the message is in read-only mode.
org.apache.activemq.command.ActiveMQStreamMessage.writeChar()
Writes a char to the stream message. @param value the char value to be written @throws JMSException if the JMS provider fails to write the message dueto some internal error. @throws MessageNotWriteableException if the message is in read-only mode.
org.apache.hadoop.fs.FSDataOutputStream.writeChar()
org.apache.jackrabbit.core.journal.Record.writeChar()
Write a character to the underlying stream. @param c character @throws JournalException if an error occurs
org.apache.qpid.client.message.JMSBytesMessage.writeChar()
org.apache.qpid.client.message.JMSStreamMessage.writeChar()
org.codehaus.activemq.message.ActiveMQBytesMessage.writeChar()
Writes a char to the bytes message stream as a 2-byte value, high byte first. @param value the char value to be written @throws JMSException if the JMS provider fails to write the message due to some internal error. @throws MessageNotWriteableException if the message is in read-only mode.
org.codehaus.activemq.message.ActiveMQStreamMessage.writeChar()
Writes a char to the stream message. @param value the char value to be written @throws JMSException if the JMS provider fails to write the messagedue to some internal error. @throws MessageNotWriteableException if the message is in read-onlymode.
org.hornetq.jms.client.HornetQStreamMessage.writeChar()
org.hornetq.jms.tests.message.SimpleJMSStreamMessage.writeChar()
org.jboss.jms.message.JBossBytesMessage.writeChar()
org.jboss.jms.message.JBossStreamMessage.writeChar()
org.jboss.netty.buffer.ChannelBuffer.writeChar()
Sets the specified 2-byte UTF-16 character at the current {@code writerIndex} and increases the {@code writerIndex} by {@code 2}in this buffer. The 16 high-order bits of the specified value are ignored. @throws IndexOutOfBoundsException if {@code this.writableBytes} is less than {@code 2}
org.jboss.test.messaging.jms.message.SimpleJMSStreamMessage.writeChar()
org.jgroups.util.ByteArrayDataOutputStream.writeChar()

Examples of java.io.ObjectOutput.writeChar()

        for (int i = 0; i < 10; i++)
        {
            output.writeUTF("Test" + i);
        }


        output.writeChar(55);


        output.writeLong(5);


        for (int i = 0; i < 10; i++)
        {

View Full Code Here

Examples of java.io.ObjectOutputStream.writeChar()

    oos.writeDouble(Double.NaN);
    
    byte[] bytes = new byte[] {-1,2,-3,4,-5};
    oos.writeObject(bytes);
    oos.writeByte(100);
    oos.writeChar('X');
    oos.close();


    streamData = os.toByteArray();
    
    harness.check(streamData.length, 76, "Stream length");

View Full Code Here

Examples of java.io.ObjectOutputStream.writeChar()


    private byte [] marshallThingy(DataObject thingy ) throws IOException { 
        ByteArrayOutputStream baos = new ByteArrayOutputStream();
        ObjectOutputStream stream = new ObjectOutputStream(baos);


        stream.writeChar(thingy.type);
        stream.writeLong(thingy.time);
        if( thingy.intCount != null ) { 
            stream.writeInt(thingy.intCount);
        }
        else if( thingy.strCount != null ) {

View Full Code Here

Examples of java.io.RandomAccessFile.writeChar()

        // a different VM could get the same file name.
        try
        {
            RandomAccessFile file;
            file = new RandomAccessFile(exceptionFile, "rw");
            file.writeChar('t');
            file.close();
        }
        catch (Exception ex)
        {
            // ignore

View Full Code Here

Examples of java.io.RandomAccessFile.writeChar()

     * @throws Exception if failed
     */
    @Test
    public void testReadChar() throws Exception {
        RandomAccessFile file = file();
        file.writeChar('a');
        file.writeChar(0xa000);
        file.seek(0);


        BufferedFileInput buf = manage(new BufferedFileInput(file, 256));
        assertThat(buf.readChar(), is('a'));

View Full Code Here

Examples of java.io.RandomAccessFile.writeChar()

     */
    @Test
    public void testReadChar() throws Exception {
        RandomAccessFile file = file();
        file.writeChar('a');
        file.writeChar(0xa000);
        file.seek(0);


        BufferedFileInput buf = manage(new BufferedFileInput(file, 256));
        assertThat(buf.readChar(), is('a'));
        assertThat(buf.readChar(), is((char) 0xa000));

View Full Code Here

Examples of java.io.RandomAccessFile.writeChar()

     * @tests java.io.RandomAccessFile#readChar()
     */
    public void test_readChar() throws IOException {
        // Test for method char java.io.RandomAccessFile.readChar()
        RandomAccessFile raf = new java.io.RandomAccessFile(fileName, "rw");
        raf.writeChar('T');
        raf.seek(0);
        assertEquals("Incorrect char read/written", 'T', raf.readChar());
        raf.close();
    }

View Full Code Here

Examples of java.io.RandomAccessFile.writeChar()

     * @tests java.io.RandomAccessFile#writeChar(int)
     */
    public void test_writeCharI() throws IOException {
        // Test for method void java.io.RandomAccessFile.writeChar(int)
        RandomAccessFile raf = new java.io.RandomAccessFile(fileName, "rw");
        raf.writeChar('T');
        raf.seek(0);
        assertEquals("Incorrect char read/written", 'T', raf.readChar());
        raf.close();
    }

View Full Code Here

Examples of java.io.RandomAccessFile.writeChar()

     * @tests java.io.RandomAccessFile#writeChar(int)
     */
    public void test_writeCharI() throws IOException {
        // Test for method void java.io.RandomAccessFile.writeChar(int)
        RandomAccessFile raf = new java.io.RandomAccessFile(fileName, "rw");
        raf.writeChar('T');
        raf.seek(0);
        assertEquals("Incorrect char read/written", 'T', raf.readChar());
        raf.close();
    }

View Full Code Here

Examples of java.io.RandomAccessFile.writeChar()

     * @tests java.io.RandomAccessFile#readChar()
     */
    public void test_readChar() throws IOException {
        // Test for method char java.io.RandomAccessFile.readChar()
        RandomAccessFile raf = new java.io.RandomAccessFile(fileName, "rw");
        raf.writeChar('T');
        raf.seek(0);
        assertEquals("Incorrect char read/written", 'T', raf.readChar());
        raf.close();
    }

View Full Code Here

0 1 2 3 4 5 6

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.