List of renewFor() Examples

Examples of renewFor()

net.jini.lease.LeaseRenewalSet.renewFor()
Include a client lease in the set for a specified duration and with a specified renewal duration.
The leaseToRenew argument specifies the lease to be added to the set. An IllegalArgumentException must be thrown if the lease was granted by the renewal service itself. If leaseToRenew is null, a NullPointerException must be thrown.
The desiredDuration argument is the number of milliseconds the client would like the lease to remain in the set. It is used to calculate the lease's initial desired expiration by adding desiredDuration to the current time (as viewed by the service). If this causes an overflow, a desired expiration of Long.MAX_VALUE will be used. Unlike a lease duration, the desired duration is unilaterally specified by the client, not negotiated between the client and the service. Note, a negative value for desiredDuration (including Lease.ANY) will result in a desired expiration that is in the past, causing leaseToRenew to be dropped from the set; this action will neither result in an exception or an event.
If the actual expiration time of leaseToRenew is less than the current time (as viewed by the renewal service) and the current time is less than the desired expiration time for leaseToRenew, the method will return normally. However, leaseToRenew will be dropped from the set and a renewal failure event will be generated.
The renewDuration is the initial renewal duration to associate with leaseToRenew (in milliseconds). If desiredDuration is exactly Long.MAX_VALUE, the renewDuration may be any positive number or Lease.ANY; otherwise it must be a positive number. If these requirements are not met, the renewal service must throw an IllegalArgumentException.
Calling this method with a lease that is equivalent to a client lease already in the set will associate the existing client lease in the set with the new desired duration and renew duration. The client lease is not replaced because it is more likely that the renewal service, rather than the client, has an up-to-date lease expiration. The service is more likely to have an up-to-date expiration because the client should not be renewing a lease that it has passed to a lease renewal service unless the lease is removed first. These semantics also allow renewFor to be used in an idempotent fashion. @param leaseToRenew the lease to be added to the renewal set @param desiredDuration the maximum length of time in millisecondsthe leaseToRenew should remain in the set, or Lease.FOREVER which implies there is no pre-specified time when the lease should be removed from the set @param renewDuration the lease duration to request when renewingthe lease, unless renewDuration is greater than the remainder of the desiredDuration @throws IllegalArgumentException if desiredDurationis Lease.FOREVER, renewDuration is not a positive value, Lease.FOREVER, or Lease.ANY. If desiredDuration is not Lease.FOREVER, IllegalArgumentException will be thrown if renewDuration is not a positive value or Lease.ANY. IllegalArgumentException will also be thrown if leaseToRenew was granted by this renewal service. @throws NullPointerException if leaseToRenew isnull @throws RemoteException if a communication-related exceptionoccurs

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

  /* now assert that a shorter time will also be honored.
     start managing the lease for the base membership time
     again */
  logger.log(Level.FINE, "Adding lease with membership of " +
        doubleDuration + " milliseconds");
  set.renewFor(testLease, doubleDuration);
  logger.log(Level.FINE, "Re-adding lease with membership of " +
        membershipDuration + " milliseconds");
  set.renewFor(testLease, membershipDuration);
  
  // sleep 1.5 times the membership to ensure expiration

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

  logger.log(Level.FINE, "Adding lease with membership of " +
        doubleDuration + " milliseconds");
  set.renewFor(testLease, doubleDuration);
  logger.log(Level.FINE, "Re-adding lease with membership of " +
        membershipDuration + " milliseconds");
  set.renewFor(testLease, membershipDuration);
  
  // sleep 1.5 times the membership to ensure expiration
  sleepTime = membershipDuration + (membershipDuration / 2);
  rstUtil.sleepAndTell(sleepTime, "1.5 X membership duration.");

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

        renewGrant + " milliseconds.");
  failLease = 
      leaseProvider.createNewLease(owner, 
           rstUtil.durToExp(renewGrant));
  long failLeaseLocalExpiration = failLease.getExpiration();
  set.renewFor(failLease, Lease.FOREVER);
  long nextFailExpiration = failLeaseLocalExpiration + renewGrant;


  // register listener to receive expiration warning events
  long minWarning = renewSetDur / 2;
  logger.log(Level.FINE, "Registering listener for expiration" +

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

      leaseProvider.createNewLease(owner, 
           rstUtil.durToExp(renewGrant));


  // start managing the lease for as long as we can
  logger.log(Level.FINE, "Adding managed lease to lease renewal set.");
  set.renewFor(testLease, Long.MAX_VALUE);
  
  // Remove the lease. Removal should succeed.
  logger.log(Level.FINE, "Removing the managed lease from the set.");
  Lease managedLease = set.remove(testLease);
  if (managedLease == null) {

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

           rstUtil.durToExp(renewGrant));


  // start managing the lease for as long as we can
  logger.log(Level.FINE, "Adding managed lease to lease renewal set.");
  logger.log(Level.FINE, "Membership = Lease.FOREVER.");
  set.renewFor(testLease, Lease.FOREVER);
  
  // wait for the lease to expire
  rstUtil.waitForLeaseExpiration(testLease,
               "for client lease to expire.");

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

  }      


  /* assert that attempting to add the set01's lease to set02
     generates an IllegalArgumentException */
  try {
      set02.renewFor(setLease, renewGrant);
      String message = "An attempt to add a renewal set's lease\n";
      message += " to another set has succeeded.";
      throw new TestException(message);
  } catch (IllegalArgumentException ex) {
      // success, keep on trucking ...

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

  set01.renewFor(testLease, renewGrant);


  /* assert that attempting to add the test lease to set02
     succeeds. */
  try {
      set02.renewFor(testLease, renewGrant);
      // success
  } catch (IllegalArgumentException ex) {
      String message = "An attempt to add a client lease\n";
      message += " to two different sets has failed.";
      throw new TestException(message, ex);

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

   * Assert that adding set01's lease to set02 succeeds if set01's
   * lease has been cancelled.
   */
  setLease.cancel();
  try {
      set02.renewFor(setLease, renewGrant);
  } catch (IllegalArgumentException ex) {
    throw new TestException("Failed to add an expired set "
          + "lease to another set", 
          ex);
  }

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

      logger.log(Level.FINE, "Adding short owner lease #" + i + 
            " to renewal set.\n" +
            "Renew duration = " + renewDuration + 
            " milliseconds.\n" +
            "Membership = Long.MAX_VALUE");
      set.renewFor(shortLease[i], shortMembership, renewDuration);


      logger.log(Level.FINE, "Adding exact owner lease #" + i + 
            " to renewal set.\n" +
            "Renew duration = " + renewDuration + 
            " milliseconds.\n" +

View Full Code Here

Examples of net.jini.lease.LeaseRenewalSet.renewFor()

      logger.log(Level.FINE, "Adding exact owner lease #" + i + 
            " to renewal set.\n" +
            "Renew duration = " + renewDuration + 
            " milliseconds.\n" +
            "Membership = Long.MAX_VALUE");
      set.renewFor(exactLease[i], Long.MAX_VALUE, renewDuration);


      logger.log(Level.FINE, "Adding long owner lease #" + i + 
            " to renewal set.\n" +
            "Renew duration = " + renewDuration + 
            " milliseconds.\n" +

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.