List of plusMonths() Examples

Examples of plusMonths()

org.joda.time.DateTime.plusMonths()
Returns a copy of this datetime plus the specified number of months.
The calculation will do its best to only change the month field retaining the same day of month. However, in certain circumstances, it may be necessary to alter smaller fields. For example, 2007-03-31 plus one month cannot result in 2007-04-31, so the day of month is adjusted to 2007-04-30.
The following three lines are identical in effect:
```
 DateTime added = dt.plusMonths(6); DateTime added = dt.plus(Period.months(6)); DateTime added = dt.withFieldAdded(DurationFieldType.months(), 6); 
```
This datetime instance is immutable and unaffected by this method call. @param months the amount of months to add, may be negative @return the new datetime plus the increased months @since 1.1
org.joda.time.LocalDate.plusMonths()
Returns a copy of this date plus the specified number of months.
This LocalDate instance is immutable and unaffected by this method call.
The following three lines are identical in effect:
```
 LocalDate added = dt.plusMonths(6); LocalDate added = dt.plus(Period.months(6)); LocalDate added = dt.withFieldAdded(DurationFieldType.months(), 6); 
```
@param months the amount of months to add, may be negative @return the new LocalDate plus the increased months
org.joda.time.Period.plusMonths()
Returns a new period plus the specified number of months added.
This period instance is immutable and unaffected by this method call. @param months the amount of months to add, may be negative @return the new period plus the increased months @throws UnsupportedOperationException if the field is not supported
org.joda.time.YearMonthDay.plusMonths()
Returns a copy of this date plus the specified number of months.
This date instance is immutable and unaffected by this method call.
The following three lines are identical in effect:
```
 YearMonthDay added = dt.plusMonths(6); YearMonthDay added = dt.plus(Period.months(6)); YearMonthDay added = dt.withFieldAdded(DurationFieldType.months(), 6); 
```
@param months the amount of months to add, may be negative @return the new date plus the increased months @since 1.1
org.threeten.bp.LocalDate.plusMonths()
Returns a copy of this {@code LocalDate} with the specified period in months added.
This method adds the specified amount to the months field in three steps:
1. Add the input months to the month-of-year field
2. Check if the resulting date would be invalid
3. Adjust the day-of-month to the last valid day if necessary
For example, 2007-03-31 plus one month would result in the invalid date 2007-04-31. Instead of returning an invalid result, the last valid day of the month, 2007-04-30, is selected instead.
This instance is immutable and unaffected by this method call. @param monthsToAdd the months to add, may be negative @return a {@code LocalDate} based on this date with the months added, not null @throws DateTimeException if the result exceeds the supported date range
org.threeten.bp.YearMonth.plusMonths()
Returns a copy of this year-month with the specified period in months added.
This instance is immutable and unaffected by this method call. @param monthsToAdd the months to add, may be negative @return a {@code YearMonth} based on this year-month with the months added, not null @throws DateTimeException if the result exceeds the supported range
org.threeten.bp.ZonedDateTime.plusMonths()
Returns a copy of this {@code ZonedDateTime} with the specified period in months added.
This operates on the local time-line, {@link LocalDateTime#plusMonths(long) adding months} to the local date-time.This is then converted back to a {@code ZonedDateTime}, using the zone ID to obtain the offset.
When converting back to {@code ZonedDateTime}, if the local date-time is in an overlap, then the offset will be retained if possible, otherwise the earlier offset will be used. If in a gap, the local date-time will be adjusted forward by the length of the gap.
This instance is immutable and unaffected by this method call. @param months the months to add, may be negative @return a {@code ZonedDateTime} based on this date-time with the months added, not null @throws DateTimeException if the result exceeds the supported date range

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);




  }


  @Override

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);


  }


}

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);




  }


  @Override

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);


  }


}

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

      int offsetIndex = index * 16;
      int months  = data.getInt(offsetIndex);
      int days    = data.getInt(offsetIndex + 4);
      int millis = data.getInt(offsetIndex + 8);
      Period p = new Period();
      return p.plusMonths(months).plusDays(days).plusMillis(millis);
    }
    
    public StringBuilder getAsStringBuilder(int index) {


      int offsetIndex = index * 16;

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);




  }


  @Override

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);


  }


}

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);




  }


  @Override

View Full Code Here

Examples of org.joda.time.Period.plusMonths()

    if (!holder.isSet()) {
      return null;
    }


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);


  }


}

View Full Code Here

Examples of org.joda.time.Period.plusMonths()


  @Override
  public Period readPeriod(){


      Period p = new Period();
      return p.plusMonths(holder.months).plusDays(holder.days).plusMillis(holder.milliSeconds);




  }


  @Override

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.