List of buffer() Examples

Examples of buffer()

com.arjuna.ats.arjuna.state.OutputBuffer.buffer()
Return the byte array used to store data types.
com.arjuna.ats.arjuna.state.OutputObjectState.buffer()
com.facebook.presto.jdbc.internal.netty.buffer.ChannelBufferOutputStream.buffer()
Returns the buffer where this stream is writing data.
com.google.gwt.typedarrays.shared.Uint8Array.buffer()
com.jcraft.jogg.Buffer.buffer()
com.jcraft.jogg.SyncState.buffer()
com.trolltech.qt.core.QBuffer.buffer()
com.vividsolutions.jts.geom.Geometry.buffer()
Computes a buffer area around this geometry having the given width. The buffer of a Geometry is the Minkowski sum or difference of the geometry with a disc of radius abs(distance).
Mathematically-exact buffer area boundaries can contain circular arcs. To represent these arcs using linear geometry they must be approximated with line segments. The buffer geometry is constructed using 8 segments per quadrant to approximate the circular arcs. The end cap style is CAP_ROUND.
The buffer operation always returns a polygonal result. The negative or zero-distance buffer of lines and points is always an empty {@link Polygon}. This is also the result for the buffers of degenerate (zero-area) polygons. @param distance the width of the buffer (may be positive, negative or 0) @return a polygonal geometry representing the buffer region (which may beempty) @throws TopologyException if a robustness error occurs @see #buffer(double,int) @see #buffer(double,int,int)
com.vividsolutions.jts.geom.GeometryCollection.buffer()
com.vividsolutions.jts.geom.LineString.buffer()
com.vividsolutions.jts.geom.MultiPolygon.buffer()
com.vividsolutions.jts.geom.Point.buffer()
com.vividsolutions.jts.geom.Polygon.buffer()
er.extensions.remoteSynchronizer.ERXRemoteSynchronizer.RefByteArrayOutputStream.buffer()
io.fabric8.gateway.handlers.detecting.protocol.openwire.command.CachedEncodingTrait.buffer()
io.netty.buffer.ByteBufAllocator.buffer()
Allocate a {@link ByteBuf}. If it is a direct or heap buffer depends on the actual implementation.
io.netty.buffer.ChannelBufferOutputStream.buffer()
net.gleamynode.netty.buffer.ChannelBufferOutputStream.buffer()
net.tomp2p.futures.FutureDirect.buffer()
net.tomp2p.message.Buffer.buffer()
net.tomp2p.message.Message.buffer()
net.tomp2p.p2p.builder.SendDirectBuilder.buffer()
net.tomp2p.storage.Data.buffer()
one.nio.util.ByteArrayBuilder.buffer()
org.agilewiki.jactor2.core.impl.mtReactors.ReactorMtImpl.buffer()
Buffers a message in the sending targetReactor for sending later. @param _message Message to be buffered. @param _target The reactor that should eventually receive this message @return True if the message was buffered.
org.apache.directory.api.util.ByteBuffer.buffer()
Get's the bytes, the backing store for this buffer. Note that you need to use the position index to determine where to stop reading from this buffer.
org.apache.directory.shared.util.ByteBuffer.buffer()
Get's the bytes, the backing store for this buffer. Note that you need to use the position index to determine where to stop reading from this buffer.
org.apache.drill.exec.memory.BufferAllocator.buffer()
Allocate a new or reused buffer of the provided size. Note that the buffer may technically be larger than the requested size for rounding purposes. However, the buffers capacity will be set to the configured size. @param size The size in bytes. @return A new ByteBuf.
org.apache.drill.exec.memory.DirectBufferAllocator.buffer()
org.apache.drill.exec.memory.TopLevelAllocator.buffer()
org.apache.hadoop.io.file.tfile.RawComparable.buffer()
Get the underlying byte array. @return The underlying byte array.
org.apache.hadoop.zebra.tfile.RawComparable.buffer()
Get the underlying byte array. @return The underlying byte array.
org.apache.http.io.ByteArrayBuffer.buffer()
org.apache.http.io.CharArrayBuffer.buffer()
org.apache.http.util.ByteArrayBuffer.buffer()
org.apache.http.util.CharArrayBuffer.buffer()
org.apache.james.mime4j.util.ByteArrayBuffer.buffer()
org.apache.james.mime4j.util.CharArrayBuffer.buffer()
org.apache.lucene.analysis.Token.buffer()
org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()
Returns the internal termBuffer character array which you can then directly alter. If the array is too small for your token, use {@link #resizeBuffer(int)} to increase it. Afteraltering the buffer be sure to call {@link #setLength} to record the number of validcharacters that were placed into the termBuffer.
NOTE: The returned buffer may be larger than the valid {@link #length()}.
org.apache.qpid.transport.codec.BBEncoder.buffer()
org.fusesource.hawtbuf.Buffer.buffer()
org.geomajas.gwt.client.spatial.Bbox.buffer()
Return a new bounding box that has increased in size by adding a range to this bounding box. @param range Must be a positive number, otherwise null will be returned. @return
org.hypertable.thrift.SerializedCellsWriter.buffer()
org.jboss.netty.buffer.ChannelBufferOutputStream.buffer()
Returns the buffer where this stream is writing data.
org.jgroups.util.ByteArrayDataOutputStream.buffer()
org.voltdb.messaging.FastDeserializer.buffer()
@return The byte buffer contained in this object.
org.vorbis.jcraft.jogg.Buffer.buffer()
@return
org.vorbis.jcraft.jogg.SyncState.buffer()
@param size @return

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()


      // common case fast-path of first token not matching anything
      AttributeSource firstTok = nextTok();
      if (firstTok == null) return false;
      CharTermAttribute termAtt = firstTok.addAttribute(CharTermAttribute.class);
      SlowSynonymMap result = map.submap!=null ? map.submap.get(termAtt.buffer(), 0, termAtt.length()) : null;
      if (result == null) {
        copy(this, firstTok);
        return true;
      }

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

        // clone ourselves.
        if (tok == this)
          tok = cloneAttributes();
        // check for positionIncrement!=1?  if>1, should not match, if==0, check multiple at this level?
        CharTermAttribute termAtt = tok.getAttribute(CharTermAttribute.class);
        SlowSynonymMap subMap = map.submap.get(termAtt.buffer(), 0, termAtt.length());


        if (subMap != null) {
          // recurse
          result = match(subMap);
        }

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

          PayloadAttribute payloadAtt = stream.addAttribute(PayloadAttribute.class);
          PositionIncrementAttribute posIncAtt = stream.addAttribute(PositionIncrementAttribute.class);
          stream.reset();
          while (stream.incrementToken()) {
            Token token = new Token();
            token.copyBuffer(termAtt.buffer(), 0, termAtt.length());
            token.setStartOffset(matcher.start());
            token.setEndOffset(matcher.end());
            token.setFlags(flagsAtt.getFlags());
            token.setType(typeAtt.type());
            token.setPayload(payloadAtt.getPayload());

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

    PayloadAttribute payloadAtt = ts.addAttribute(PayloadAttribute.class);
    PositionIncrementAttribute posIncAtt = ts.addAttribute(PositionIncrementAttribute.class);
    
    while (ts.incrementToken()){
      Token token = new Token();
      token.copyBuffer(termAtt.buffer(), 0, termAtt.length());
      token.setOffset(offsetAtt.startOffset(), offsetAtt.endOffset());
      token.setType(typeAtt.type());
      token.setFlags(flagsAtt.getFlags());
      token.setPayload(payloadAtt.getPayload());
      token.setPositionIncrement(posIncAtt.getPositionIncrement());

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

    reusableToken.clear();
    if(termAtt != null) {
      //lucene 3.0
      //reusableToken.setTermBuffer(termAtt.termBuffer(), 0, termAtt.termLength());
      //lucene 3.1
      reusableToken.copyBuffer(termAtt.buffer(), 0, termAtt.length());
    }
    if(offsetAtt != null) {
      //lucene 3.1
      //reusableToken.setStartOffset(offsetAtt.startOffset());
      //reusableToken.setEndOffset(offsetAtt.endOffset());

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()


      // common case fast-path of first token not matching anything
      AttributeSource firstTok = nextTok();
      if (firstTok == null) return false;
      CharTermAttribute termAtt = firstTok.addAttribute(CharTermAttribute.class);
      SlowSynonymMap result = map.submap!=null ? map.submap.get(termAtt.buffer(), 0, termAtt.length()) : null;
      if (result == null) {
        copy(this, firstTok);
        return true;
      }

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

        // clone ourselves.
        if (tok == this)
          tok = cloneAttributes();
        // check for positionIncrement!=1?  if>1, should not match, if==0, check multiple at this level?
        CharTermAttribute termAtt = tok.getAttribute(CharTermAttribute.class);
        SlowSynonymMap subMap = map.submap.get(termAtt.buffer(), 0, termAtt.length());


        if (subMap != null) {
          // recurse
          result = match(subMap);
        }

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

          int end = reuse.offset + reuse.length;
          if (reuse.length > 0) {
            reuse.chars[end++] = SynonymMap.WORD_SEPARATOR;
            reuse.length++;
          }
          System.arraycopy(termAtt.buffer(), 0, reuse.chars, end, length);
          reuse.length += length;
        }
        ts.end();
      } catch (IOException e) {
        priorException = e;

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

  public static List<String> tokenizedTermValues(Analyzer analyzer, String field, String text) throws IOException {
    TokenStream stream = analyzer.tokenStream( field, new StringReader( text ) );
    CharTermAttribute term = stream.addAttribute( CharTermAttribute.class );
    List<String> tokenList = new ArrayList<String>();
    while ( stream.incrementToken() ) {
      String s = new String( term.buffer(), 0, term.length() );
      tokenList.add( s );
    }
    return tokenList;
  }

View Full Code Here

Examples of org.apache.lucene.analysis.tokenattributes.CharTermAttribute.buffer()

    TokenStream stream = analyzer.tokenStream( field, new StringReader( text ) );
    CharTermAttribute term = stream.addAttribute( CharTermAttribute.class );
    List<Token> tokenList = new ArrayList<Token>();
    while ( stream.incrementToken() ) {
      Token token = new Token();
      token.copyBuffer( term.buffer(), 0, term.length() );
      tokenList.add( token );
    }


    return tokenList.toArray( new Token[tokenList.size()] );
  }

View Full Code Here

0 1 2 3 4 5 6 7 8

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.