Examples of TableSorter

DisplayProject.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same * three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
au.edu.qut.yawl.swingWorklist.util.TableSorter
chrriis.common.ui.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
com.cburch.logisim.util.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This class first appeared in the swing table demos in 1997 (v1.5) and then had a major rewrite in 2004 (v2.0) to make it compatible with Java 1.4.
This rewrite makes the class compile cleanly with Java 1.5 while maintaining backward compatibility with TableSorter v2.0. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @author ouroborus@ouroborus.org @version 2.1 04/29/06
com.eastmountain.chinese.common.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
com.qspin.qtaste.ui.tools.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
com.salas.bb.utils.uif.table.TableSorter
Sort-filter for any table model.
edu.harvard.wcfia.yoshikoder.ui.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
entagged.tageditor.models.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
net.helipilot50.stocktrade.displayproject.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same * three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
nu.fw.jeti.util.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events revieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in a different order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
@author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon
nu.lazy8.ledger.reports.TableSorter
Description of the Class @author Lazy Eight Data HB, Thomas Dilts @created den 5 mars 2002
org.beryl.gui.table.TableSorter
org.jets3t.gui.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
org.netbeans.modules.versioning.util.TableSorter
org.owasp.webscarab.util.swing.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events revieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in a different order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
@author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon
org.twodividedbyzero.idea.findbugs.gui.common.TableSorter
TableSorter is a decorator for TableModels; adding sorting functionality to a supplied TableModel. TableSorter does not store or copy the data in its TableModel; instead it maintains a map from the row indexes of the view to the row indexes of the model. As requests are made of the sorter (like getValueAt(row, col)) they are passed to the underlying model after the row numbers have been translated via the internal mapping array. This way, the TableSorter appears to hold another copy of the table with the rows in a different order.
TableSorter registers itself as a listener to the underlying model, just as the JTable itself would. Events recieved from the model are examined, sometimes manipulated (typically widened), and then passed on to the TableSorter's listeners (typically the JTable). If a change to the model has invalidated the order of TableSorter's rows, a note of this is made and the sorter will resort the rows the next time a value is requested.
When the tableHeader property is set, either by using the setTableHeader() method or the two argument constructor, the table header may be used as a complete UI for TableSorter. The default renderer of the tableHeader is decorated with a renderer that indicates the sorting status of each column. In addition, a mouse listener is installed with the following behavior:
- Mouse-click: Clears the sorting status of all other columns and advances the sorting status of that column through three values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to NOT_SORTED again).
- SHIFT-mouse-click: Clears the sorting status of all other columns and cycles the sorting status of the column through the same three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
- CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except that the changes to the column do not cancel the statuses of columns that are already sorting - giving a way to initiate a compound sort.
This is a long overdue rewrite of a class of the same name that first appeared in the swing table demos in 1997. @author Philip Milne @author Brendon McLean @author Dan van Enckevort @author Parwinder Sekhon @version 2.0 02/27/04
org.xnap.commons.gui.table.TableSorter

Examples of org.jets3t.gui.TableSorter

        objectsPanel.add(filterObjectsPanel, 
            new GridBagConstraints(0, ++row, 3, 1, 0, 0, GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));
                
        objectsTable = skinsFactory.createSkinnedJTable("ObjectsTable");
        objectTableModel = new CLObjectTableModel();
        objectTableModelSorter = new TableSorter(objectTableModel);        
        objectTableModelSorter.setTableHeader(objectsTable.getTableHeader());        
        objectsTable.setModel(objectTableModelSorter);        
        objectsTable.setDefaultRenderer(Long.class, new DefaultTableCellRenderer() {
            private static final long serialVersionUID = 7229656175879985698L;

View Full Code Here

Examples of org.jets3t.gui.TableSorter


        private TableSorter sorter = null;


        public GranteeTable(GranteeTableModel granteeTableModel) {
            super();
            sorter = new TableSorter(granteeTableModel);
            this.setModel(sorter);
            sorter.setTableHeader(this.getTableHeader());


            getSelectionModel().setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
            getSelectionModel().addListSelectionListener(this);

View Full Code Here

Examples of org.jets3t.gui.TableSorter

            new GridBagConstraints(0, 0, 1, 1, 1, 0, GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));
        bucketsPanel.add(bucketActionButton,
            new GridBagConstraints(1, 0, 1, 1, 0, 0, GridBagConstraints.EAST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));


        bucketTableModel = new BucketTableModel(false);
        bucketTableModelSorter = new TableSorter(bucketTableModel);
        bucketsTable = new JTable(bucketTableModelSorter);
        bucketTableModelSorter.setTableHeader(bucketsTable.getTableHeader());
        bucketsTable.setSelectionMode(ListSelectionModel.SINGLE_SELECTION);
        bucketsTable.getSelectionModel().addListSelectionListener(this);
        bucketsTable.setShowHorizontalLines(true);
        bucketsTable.setShowVerticalLines(false);
        bucketsTable.addMouseListener(new ContextMenuListener());
        bucketsPanel.add(new JScrollPane(bucketsTable),
            new GridBagConstraints(0, 1, 2, 1, 1, 1, GridBagConstraints.CENTER, GridBagConstraints.BOTH, insetsZero, 0, 0));
        bucketsPanel.add(new JLabel(" "),
            new GridBagConstraints(0, 2, 2, 1, 0, 0, GridBagConstraints.WEST, GridBagConstraints.NONE, insetsDefault, 0, 0));


        // Filter panel.
        filterObjectsPanel = new JPanel(new GridBagLayout());
        filterObjectsPrefix = new JTextField();
        filterObjectsPrefix.setToolTipText("Only show objects with this prefix");
        filterObjectsPrefix.addActionListener(this);
        filterObjectsPrefix.setActionCommand("RefreshObjects");
        filterObjectsDelimiter = new JComboBox(new String[] {"", "/", "?", "\\"});
        filterObjectsDelimiter.setEditable(true);
        filterObjectsDelimiter.setToolTipText("Object name delimiter");
        filterObjectsDelimiter.addActionListener(this);
        filterObjectsDelimiter.setActionCommand("RefreshObjects");
        filterObjectsPanel.add(new JHtmlLabel("Prefix:", this),
            new GridBagConstraints(0, 0, 1, 1, 0, 0, GridBagConstraints.WEST, GridBagConstraints.NONE, insetsZero, 0, 0));
        filterObjectsPanel.add(filterObjectsPrefix,
            new GridBagConstraints(1, 0, 1, 1, 1, 0, GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, insetsDefault, 0, 0));
        filterObjectsPanel.add(new JHtmlLabel("Delimiter:", this),
            new GridBagConstraints(2, 0, 1, 1, 0, 0, GridBagConstraints.WEST, GridBagConstraints.NONE, insetsDefault, 0, 0));
        filterObjectsPanel.add(filterObjectsDelimiter,
            new GridBagConstraints(3, 0, 1, 1, 0, 0, GridBagConstraints.WEST, GridBagConstraints.NONE, insetsZero, 0, 0));
        filterObjectsPanel.setVisible(false);


        // Objects panel.
        JPanel objectsPanel = new JPanel(new GridBagLayout());
        int row = 0;
        filterObjectsCheckBox = new JCheckBox("Filter objects");
        filterObjectsCheckBox.addActionListener(this);
        filterObjectsCheckBox.setToolTipText("Check this option to filter the objects listed");
        objectsPanel.add(new JHtmlLabel("<html><b>Objects</b></html>", this),
            new GridBagConstraints(0, row, 1, 1, 1, 0, GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));
        objectsPanel.add(filterObjectsCheckBox,
            new GridBagConstraints(1, row, 1, 1, 0, 0, GridBagConstraints.EAST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));


        JButton objectActionButton = new JButton();
        objectActionButton.setToolTipText("Object actions menu");
        guiUtils.applyIcon(objectActionButton, "/images/nuvola/16x16/actions/misc.png");
        objectActionButton.addActionListener(new ActionListener() {
           public void actionPerformed(ActionEvent e) {
                JButton sourceButton = (JButton) e.getSource();
                objectActionMenu.show(sourceButton, 0, sourceButton.getHeight());
           }
        });
        objectsPanel.add(objectActionButton,
            new GridBagConstraints(2, row, 1, 1, 0, 0, GridBagConstraints.EAST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));


        objectsPanel.add(filterObjectsPanel,
            new GridBagConstraints(0, ++row, 3, 1, 0, 0, GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));


        objectsTable = new JTable();
        objectTableModel = new ObjectTableModel();
        objectTableModelSorter = new TableSorter(objectTableModel);
        objectTableModelSorter.setTableHeader(objectsTable.getTableHeader());
        objectsTable.setModel(objectTableModelSorter);
        objectsTable.setDefaultRenderer(Long.class, new DefaultTableCellRenderer() {
            private static final long serialVersionUID = 301092191828910402L;

View Full Code Here

Examples of org.jets3t.gui.TableSorter

                        stopProgressDialog();
                        cloudFrontMembershipChecked = true;


                        // Update the bucket table to show, or not show, distributions
                        bucketTableModel = new BucketTableModel(cloudFrontService != null);
                        bucketTableModelSorter = new TableSorter(bucketTableModel);
                        bucketsTable.setModel(bucketTableModelSorter);
                        bucketTableModelSorter.setTableHeader(bucketsTable.getTableHeader());


                        if (cloudFrontService != null) {
                            // Set column width for Cloud Front distributions indicator.

View Full Code Here

Examples of org.jets3t.gui.TableSorter

        objectsPanel.add(filterObjectsPanel,
            new GridBagConstraints(0, ++row, 3, 1, 0, 0, GridBagConstraints.WEST, GridBagConstraints.HORIZONTAL, insetsZero, 0, 0));


        objectsTable = skinsFactory.createSkinnedJTable("ObjectsTable");
        objectTableModel = new CLObjectTableModel();
        objectTableModelSorter = new TableSorter(objectTableModel);
        objectTableModelSorter.setTableHeader(objectsTable.getTableHeader());
        objectsTable.setModel(objectTableModelSorter);
        objectsTable.setDefaultRenderer(Long.class, new DefaultTableCellRenderer() {
            private static final long serialVersionUID = 7229656175879985698L;

View Full Code Here

Examples of org.netbeans.modules.versioning.util.TableSorter


    private void init(JLabel label, String[] columns, TableSorter sorter) {
        tableModel = new PropertiesTableModel(columns);
        tableModel.addTableModelListener(this);
        if (sorter == null) {
            sorter = new TableSorter(tableModel);
        }
        this.sorter = sorter;
        table = new JTable(this.sorter);
        table.getTableHeader().setReorderingAllowed(false);
        table.setDefaultRenderer(String.class, new PropertiesTableCellRenderer());

View Full Code Here

Examples of org.owasp.webscarab.util.swing.TableSorter

    /** Creates new form CookieJarViewer */
    public CookieJarViewer(FrameworkModel model) {
        _model = model;
        initComponents();
        _cookieTableModel = new CookieTableModel(_model);
        cookieTable.setModel(new TableSorter(_cookieTableModel, cookieTable.getTableHeader()));
        _detailTableModel = new HistoricalCookieTableModel(_model);
        cookieDetailTable.setModel(new TableSorter(_detailTableModel, cookieDetailTable.getTableHeader()));
        cookieTable.getSelectionModel().addListSelectionListener(new ListSelectionListener() {
            public void valueChanged(ListSelectionEvent evt) {
                if (evt.getValueIsAdjusting()) return;
                int row = cookieTable.getSelectedRow();
                if (row>-1) {

View Full Code Here

Examples of org.owasp.webscarab.util.swing.TableSorter

            public Object getValue(ConversationID key) {
                return OpenIdPanel.this.openIdModel.getReadableOpenIDMessageType(key);
            }
        });
        ColumnWidthTracker.getTracker("OpenIDTable").addTable(this.openIdTable);
        TableSorter sorterOpenIdTableModel = new TableSorter(openIdTableModel);
        this.openIdTable.setModel(sorterOpenIdTableModel);
        addTableListeners();


        this.parametersTableModel = new ParametersTableModel();
        this.parametersTable.setModel(this.parametersTableModel);

View Full Code Here

Examples of org.owasp.webscarab.util.swing.TableSorter

            @Override
            public Object getValue(ConversationID key) {
                return SamlPanel.this.samlModel.getSAMLType(key);
            }
        });
        TableSorter sorterSamlTableModel = new TableSorter(samlTableModel);
        this.samlTable.setModel(sorterSamlTableModel);


        this.showConversationAction = new ShowConversationAction(this.samlModel.getSamlConversationModel());
        this.samlPopupMenu.add(new JMenuItem(this.showConversationAction));
        this.samlReplayConversationAction = new SamlReplayConversationAction(this.saml.getSamlProxy());

View Full Code Here

Examples of org.owasp.webscarab.util.swing.TableSorter

  private void initTable() {
    _conversationTableModel = new ConversationTableModel(_conversationModel);
    ColumnWidthTracker.getTracker("ConversationTable").addTable(
        conversationTable);


    _conversationTableSorter = new TableSorter(_conversationTableModel,
        conversationTable.getTableHeader());
    conversationTable.setModel(_conversationTableSorter);
    conversationTable.setDefaultRenderer(
        Boolean.class,
        new EnabledBooleanTableCellRenderer());

View Full Code Here

0 1 2 3 4 5

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.