Examples of RevoluteJointDef

com.badlogic.gdx.physics.box2d.joints.RevoluteJointDef
Revolute joint definition. This requires defining an anchor point where the bodies are joined. The definition uses local anchor points so that the initial configuration can violate the constraint slightly. You also need to specify the initial relative angle for joint limits. This helps when saving and loading a game. The local anchor points are measured from the body's origin rather than the center of mass because: 1. you might not know where the center of mass will be. 2. if you add/remove shapes from a body and recompute the mass, the joints will be broken.
org.jbox2d.dynamics.joints.RevoluteJointDef
Revolute joint definition. This requires defining an anchor point where the bodies are joined. The definition uses local anchor points so that the initial configuration can violate the constraint slightly. You also need to specify the initial relative angle for joint limits. This helps when saving and loading a game. The local anchor points are measured from the body's origin rather than the center of mass because:
- you might not know where the center of mass will be.
- if you add/remove shapes from a body and recompute the mass, the joints will be broken.

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

      body.createFixture(fd);
    }


    body.setBullet(false);


    RevoluteJointDef rjd = new RevoluteJointDef();
    rjd.initialize(body, getGroundBody(), body.getPosition());
    rjd.motorSpeed = MathUtils.PI;
    rjd.maxMotorTorque = 1000000.0f;
    rjd.enableMotor = true;
    joint = (RevoluteJoint) getWorld().createJoint(rjd);

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

      BodyDef bodyDef = new BodyDef();
      bodyDef.type = BodyType.STATIC;
      ground = getWorld().createBody(bodyDef);
    }


    RevoluteJointDef jointDef = new RevoluteJointDef();


    if (switchBodiesInJoint)
      jointDef.initialize(pendulum, ground, new Vec2(0, 0));
    else
      jointDef.initialize(ground, pendulum, new Vec2(0, 0));


    pendulum.applyAngularImpulse(10000);


    getWorld().createJoint(jointDef);
  }

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

        bd.type = BodyType.DYNAMIC;
        bd.position.set(0.0f, 7.0f);
        Body body = getWorld().createBody(bd);
        body.createFixture(shape, 2.0f);


        RevoluteJointDef rjd = new RevoluteJointDef();
        rjd.initialize(prevBody, body, new Vec2(0.0f, 5.0f));
        rjd.motorSpeed = 1.0f * MathUtils.PI;
        rjd.maxMotorTorque = 10000.0f;
        rjd.enableMotor = true;
        m_joint1 = (RevoluteJoint) getWorld().createJoint(rjd);


        prevBody = body;
      }


      // Define follower.
      {
        PolygonShape shape = new PolygonShape();
        shape.setAsBox(0.5f, 4.0f);


        BodyDef bd = new BodyDef();
        bd.type = BodyType.DYNAMIC;
        bd.position.set(0.0f, 13.0f);
        Body body = getWorld().createBody(bd);
        body.createFixture(shape, 2.0f);


        RevoluteJointDef rjd = new RevoluteJointDef();
        rjd.initialize(prevBody, body, new Vec2(0.0f, 9.0f));
        rjd.enableMotor = false;
        getWorld().createJoint(rjd);


        prevBody = body;
      }


      // Define piston
      {
        PolygonShape shape = new PolygonShape();
        shape.setAsBox(1.5f, 1.5f);


        BodyDef bd = new BodyDef();
        bd.type = BodyType.DYNAMIC;
        bd.fixedRotation = true;
        bd.position.set(0.0f, 17.0f);
        Body body = getWorld().createBody(bd);
        body.createFixture(shape, 2.0f);


        RevoluteJointDef rjd = new RevoluteJointDef();
        rjd.initialize(prevBody, body, new Vec2(0.0f, 17.0f));
        getWorld().createJoint(rjd);


        PrismaticJointDef pjd = new PrismaticJointDef();
        pjd.initialize(ground, body, new Vec2(0.0f, 17.0f), new Vec2(0.0f, 1.0f));

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

      shape.setAsBox(20.0f, 0.5f, new Vec2(0.0f, 10.0f), 0.0f);
      body.createFixture(shape, 5.0f);
      shape.setAsBox(20.0f, 0.5f, new Vec2(0.0f, -10.0f), 0.0f);
      body.createFixture(shape, 5.0f);


      RevoluteJointDef jd = new RevoluteJointDef();
      jd.bodyA = getGroundBody();
      jd.bodyB = body;
      jd.localAnchorA.set(0.0f, 10.0f);
      jd.localAnchorB.set(0.0f, 0.0f);
      jd.referenceAngle = 0.0f;

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

        def.referenceAngle = joint.getRefAngle();
        def.upperTranslation = joint.getUpperLimit();
        break;
      }
      case REVOLUTE: {
        RevoluteJointDef def = new RevoluteJointDef();
        jd = def;
        def.enableLimit = joint.getEnableLimit();
        def.enableMotor = joint.getEnableMotor();
        def.localAnchorA.set(pbToVec(joint.getLocalAnchorA()));
        def.localAnchorB.set(pbToVec(joint.getLocalAnchorB()));
        def.lowerAngle = joint.getLowerLimit();
        def.maxMotorTorque = joint.getMaxMotorTorque();
        def.motorSpeed = joint.getMotorSpeed();
        def.referenceAngle = joint.getRefAngle();
        def.upperAngle = joint.getUpperLimit();
        break;
      }
      case DISTANCE: {
        DistanceJointDef def = new DistanceJointDef();
        jd = def;
        def.localAnchorA.set(pbToVec(joint.getLocalAnchorA()));
        def.localAnchorB.set(pbToVec(joint.getLocalAnchorB()));
        def.dampingRatio = joint.getDampingRatio();
        def.frequencyHz = joint.getFrequency();
        def.length = joint.getLength();
        break;
      }
      case PULLEY: {
        PulleyJointDef def = new PulleyJointDef();
        jd = def;
        def.localAnchorA.set(pbToVec(joint.getLocalAnchorA()));
        def.localAnchorB.set(pbToVec(joint.getLocalAnchorB()));
        def.groundAnchorA.set(pbToVec(joint.getGroundAnchorA()));
        def.groundAnchorB.set(pbToVec(joint.getGroundAnchorB()));
        def.lengthA = joint.getLengthA();
        def.lengthB = joint.getLengthB();
        def.ratio = joint.getRatio();
        break;
      }
      case MOUSE: {
        MouseJointDef def = new MouseJointDef();
        jd = def;
        def.dampingRatio = joint.getDampingRatio();
        def.frequencyHz = joint.getFrequency();
        def.maxForce = joint.getMaxForce();
        def.target.set(pbToVec(joint.getTarget()));
        break;
      }
      case GEAR: {
        GearJointDef def = new GearJointDef();
        jd = def;
        if (!jointMap.containsKey(joint.getJoint1())) {
          throw new IllegalArgumentException("Index " + joint.getJoint1()
              + " is not present in the joint map.");
        }
        def.joint1 = jointMap.get(joint.getJoint1());
        if (!jointMap.containsKey(joint.getJoint2())) {
          throw new IllegalArgumentException("Index " + joint.getJoint2()
              + " is not present in the joint map.");
        }
        def.joint2 = jointMap.get(joint.getJoint2());
        def.ratio = joint.getRatio();
        break;
      }
      case WHEEL: {
        WheelJointDef def = new WheelJointDef();
        jd = def;
        def.localAnchorA.set(pbToVec(joint.getLocalAnchorA()));
        def.localAnchorB.set(pbToVec(joint.getLocalAnchorB()));
        def.localAxisA.set(pbToVec(joint.getLocalAxisA()));
        def.enableMotor = joint.getEnableMotor();
        def.maxMotorTorque = joint.getMaxMotorTorque();
        def.motorSpeed = joint.getMotorSpeed();
        def.frequencyHz = joint.getFrequency();
        def.dampingRatio = joint.getDampingRatio();
        break;
      }
      case WELD: {
        WeldJointDef def = new WeldJointDef();
        jd = def;
        def.localAnchorA.set(pbToVec(joint.getLocalAnchorA()));
        def.localAnchorB.set(pbToVec(joint.getLocalAnchorB()));
        def.referenceAngle = joint.getRefAngle();
        def.frequencyHz = joint.getFrequency();
        def.dampingRatio = joint.getDampingRatio();
        break;
      }
      case FRICTION: {
        FrictionJointDef def = new FrictionJointDef();
        jd = def;
        def.localAnchorA.set(pbToVec(joint.getLocalAnchorA()));
        def.localAnchorB.set(pbToVec(joint.getLocalAnchorB()));
        def.maxForce = joint.getMaxForce();
        def.maxTorque = joint.getMaxTorque();
        break;
      }
      case ROPE: {
        RopeJointDef def = new RopeJointDef();
        jd = def;
        def.localAnchorA.set(pbToVec(joint.getLocalAnchorA()));
        def.localAnchorB.set(pbToVec(joint.getLocalAnchorB()));
        def.maxLength = joint.getMaxLength();
        return null;
      }
      case CONSTANT_VOLUME: {
        ConstantVolumeJointDef def = new ConstantVolumeJointDef();
        jd = def;
        def.dampingRatio = joint.getDampingRatio();
        def.frequencyHz = joint.getFrequency();
        if (joint.getBodiesCount() != joint.getJointsCount()) {
          throw new IllegalArgumentException(
              "Constant volume joint must have bodies and joints defined");
        }
        for (int i = 0; i < joint.getBodiesCount(); i++) {
          int body = joint.getBodies(i);
          if (!argBodyMap.containsKey(body)) {
            throw new IllegalArgumentException("Index " + body + " is not present in the body map");
          }
          int jointIndex = joint.getJoints(i);
          if (!jointMap.containsKey(jointIndex)) {
            throw new IllegalArgumentException("Index " + jointIndex
                + " is not present in the joint map");
          }
          Joint djoint = jointMap.get(jointIndex);
          if (!(djoint instanceof DistanceJoint)) {
            throw new IllegalArgumentException(
                "Joints for constant volume joint must be distance joints");
          }
          def.addBodyAndJoint(argBodyMap.get(body), (DistanceJoint) djoint);
        }
        break;
      }
      case LINE: {
        UnsupportedObjectException e =

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

      m_wheel = getWorld().createBody(bd);
      m_wheel.createFixture(sd);
    }


    {
      RevoluteJointDef jd = new RevoluteJointDef();


      jd.initialize(m_wheel, m_chassis, pivot.add(m_offset));
      jd.collideConnected = false;
      jd.motorSpeed = m_motorSpeed;
      jd.maxMotorTorque = 400.0f;
      jd.enableMotor = m_motorOn;
      m_motorJoint = (RevoluteJoint) getWorld().createJoint(jd);

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

    getWorld().createJoint(djd);


    djd.initialize(body2, m_wheel, p6.add(m_offset), wheelAnchor.add(m_offset));
    getWorld().createJoint(djd);


    RevoluteJointDef rjd = new RevoluteJointDef();


    rjd.initialize(body2, m_chassis, p4.add(m_offset));
    getWorld().createJoint(rjd);
  }

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

      bodyDef.type = BodyType.STATIC;
      ground = getWorld().createBody(bodyDef);
      ground.createFixture(shape, 0);
    }


    RevoluteJointDef jointDef = new RevoluteJointDef();


    if (switchBodiesInJoint)
      jointDef.initialize(pendulum, base, new Vec2(0, 0));
    else
      jointDef.initialize(base, pendulum, new Vec2(0, 0));


    getWorld().createJoint(jointDef);
  }

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

      fd.shape = shape;
      fd.friction = 0.6f;
      fd.density = 2.0f;
      m_platform.createFixture(fd);


      RevoluteJointDef rjd = new RevoluteJointDef();
      rjd.initialize(m_attachment, m_platform, new Vec2(0.0f, 5.0f));
      rjd.maxMotorTorque = 50.0f;
      rjd.enableMotor = true;
      getWorld().createJoint(rjd);


      PrismaticJointDef pjd = new PrismaticJointDef();

View Full Code Here

Examples of org.jbox2d.dynamics.joints.RevoluteJointDef

        cd.m_p.set(xPos, yPos);


        body.createFixture(fd);
      }


      RevoluteJointDef rjd = new RevoluteJointDef();
      rjd.initialize(body, getGroundBody(), body.getPosition());
      rjd.motorSpeed = MathUtils.PI;
      rjd.maxMotorTorque = 1000000.0f;
      rjd.enableMotor = true;
      getWorld().createJoint(rjd);
    }




    {
      Body prevBody = ground;


      // Define crank.
      {
        PolygonShape shape = new PolygonShape();
        shape.setAsBox(0.5f, 2.0f);


        BodyDef bd = new BodyDef();
        bd.type = BodyType.DYNAMIC;
        bd.position.set(0.0f, 7.0f);
        Body body = getWorld().createBody(bd);
        body.createFixture(shape, 2.0f);


        RevoluteJointDef rjd = new RevoluteJointDef();
        rjd.initialize(prevBody, body, new Vec2(0.0f, 5.0f));
        rjd.motorSpeed = 1.0f * MathUtils.PI;
        rjd.maxMotorTorque = 20000;
        rjd.enableMotor = true;
        getWorld().createJoint(rjd);


        prevBody = body;
      }


      // Define follower.
      {
        PolygonShape shape = new PolygonShape();
        shape.setAsBox(0.5f, 4.0f);


        BodyDef bd = new BodyDef();
        bd.type = BodyType.DYNAMIC;
        bd.position.set(0.0f, 13.0f);
        Body body = getWorld().createBody(bd);
        body.createFixture(shape, 2.0f);


        RevoluteJointDef rjd = new RevoluteJointDef();
        rjd.initialize(prevBody, body, new Vec2(0.0f, 9.0f));
        rjd.enableMotor = false;
        getWorld().createJoint(rjd);


        prevBody = body;
      }


      // Define piston
      {
        PolygonShape shape = new PolygonShape();
        shape.setAsBox(7f, 2f);


        BodyDef bd = new BodyDef();
        bd.type = BodyType.DYNAMIC;
        bd.position.set(0.0f, 17.0f);
        Body body = getWorld().createBody(bd);
        FixtureDef piston = new FixtureDef();
        piston.shape = shape;
        piston.density = 2;
        piston.filter.categoryBits = 1;
        piston.filter.maskBits = 2;
        body.createFixture(piston);
        body.setBullet(false);
        
        RevoluteJointDef rjd = new RevoluteJointDef();
        rjd.initialize(prevBody, body, new Vec2(0.0f, 17.0f));
        getWorld().createJoint(rjd);


        PrismaticJointDef pjd = new PrismaticJointDef();
        pjd.initialize(ground, body, new Vec2(0.0f, 17.0f), new Vec2(0.0f, 1.0f));

View Full Code Here

0 1 2

TOP

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.