4.13. Reverb
Yet another subjective frame, with which you can adjust echoes of
different kinds. Reverb left/right is the delay between every bounce
in ms. Reverb bounces left/right is the number of bounces that should
be made. $FF equals an infinite number of bounces. Feedback is the
amount of volume that should be returned to the next echo bounce. $00
is 0%, $FF is 100%. If this value were $7F, there would be 50% volume
reduction on the first bounce, 50% of that on the second and so on.
Left to left means the sound from the left bounce to be played in the
left speaker, while left to right means sound from the left bounce to
be played in the right speaker.
'Premix left to right' is the amount of left sound to be mixed in the
right before any reverb is applied, where $00 id 0% and $FF is 100%.
'Premix right to left' does the same thing, but right to left.
Setting both premix to $FF would result in a mono output (if the
reverb is applied symmetric). There may only be one "RVRB"
frame in
each tag.
<Header for 'Reverb', ID: "RVRB">
Reverb left (ms) $xx xx
Reverb right (ms) $xx xx
Reverb bounces, left $xx
Reverb bounces, right $xx
Reverb feedback, left to left $xx
Reverb feedback, left to right $xx
Reverb feedback, right to right $xx
Reverb feedback, right to left $xx
Premix left to right $xx
Premix right to left $xx
@author Eric Farng
@version $Revision: 1.4 $