Examples of org.apache.lucene.document.IntField

org.apache.lucene.document.IntField
Field that indexes int values for efficient range filtering and sorting. Here's an example usage:
```
 document.add(new IntField(name, 6, Field.Store.NO)); 
```
For optimal performance, re-use the IntField and {@link Document} instance for more than one document:
```
 IntField field = new IntField(name, 6, Field.Store.NO); Document document = new Document(); document.add(field); for(all documents) { ... field.setIntValue(value) writer.addDocument(document); ... } 
```
See also {@link LongField}, {@link FloatField}, {@link DoubleField}.
To perform range querying or filtering against a IntField, use {@link NumericRangeQuery} or {@link NumericRangeFilter}. To sort according to a IntField, use the normal numeric sort types, eg {@link org.apache.lucene.search.SortField.Type#INT}. IntField values can also be loaded directly from {@link FieldCache}.

You may add the same field name as an IntField to the same document more than once. Range querying and filtering will be the logical OR of all values; so a range query will hit all documents that have at least one value in the range. However sort behavior is not defined. If you need to sort, you should separately index a single-valued IntField.

An IntField will consume somewhat more disk space in the index than an ordinary single-valued field. However, for a typical index that includes substantial textual content per document, this increase will likely be in the noise.

Within Lucene, each numeric value is indexed as a trie structure, where each term is logically assigned to larger and larger pre-defined brackets (which are simply lower-precision representations of the value). The step size between each successive bracket is called the precisionStep, measured in bits. Smaller precisionStep values result in larger number of brackets, which consumes more disk space in the index but may result in faster range search performance. The default value, 4, was selected for a reasonable tradeoff of disk space consumption versus performance. You can create a custom {@link FieldType} and invoke the {@link FieldType#setNumericPrecisionStep} method if you'dlike to change the value. Note that you must also specify a congruent value when creating {@link NumericRangeQuery} or {@link NumericRangeFilter}. For low cardinality fields larger precision steps are good. If the cardinality is < 100, it is fair to use {@link Integer#MAX_VALUE}, which produces one term per value.
For more information on the internals of numeric trie indexing, including the precisionStep configuration, see {@link NumericRangeQuery}. The format of indexed values is described in {@link NumericUtils}.
If you only need to sort by numeric value, and never run range querying/filtering, you can index using a precisionStep of {@link Integer#MAX_VALUE}. This will minimize disk space consumed.

More advanced users can instead use {@link NumericTokenStream} directly, when indexing numbers. Thisclass is a wrapper around this token stream type for easier, more intuitive usage.
@since 2.9


    List<Field> fields = Arrays.asList(
        new Field("bytes", bytes, ft),
        new Field("string", string, ft),
        new LongField("long", l, Store.YES),
        new IntField("int", i, Store.YES),
        new FloatField("float", f, Store.YES),
        new DoubleField("double", d, Store.YES)
    );


    for (int k = 0; k < 100; ++k) {

View Full Code Here

    }


    final FieldType type = new FieldType(StringField.TYPE_STORED);
    type.setIndexed(false);
    type.freeze();
    IntField id = new IntField("id", 0, Store.YES);
    for (int i = 0; i < data.length; ++i) {
      Document doc = new Document();
      doc.add(id);
      id.setIntValue(i);
      for (int j = 0; j < data[i].length; ++j) {
        Field f = new Field("bytes" + j, data[i][j], type);
        doc.add(f);
      }
      iw.w.addDocument(doc);

View Full Code Here

    doc.add(new Field("autf8", "Lu\uD834\uDD1Ece\uD834\uDD60ne \u0000 \u2620 ab\ud917\udc17cd", customType2));
    doc.add(new Field("utf8", "Lu\uD834\uDD1Ece\uD834\uDD60ne \u0000 \u2620 ab\ud917\udc17cd", customType2));
    doc.add(new Field("content2", "here is more content with aaa aaa aaa", customType2));
    doc.add(new Field("fie\u2C77ld", "field with non-ascii name", customType2));
    // add numeric fields, to test if flex preserves encoding
    doc.add(new IntField("trieInt", id, Field.Store.NO));
    doc.add(new LongField("trieLong", (long) id, Field.Store.NO));
    // add docvalues fields
    doc.add(new NumericDocValuesField("dvByte", (byte) id));
    byte bytes[] = new byte[] {
      (byte)(id >>> 24), (byte)(id >>> 16),(byte)(id >>> 8),(byte)id

View Full Code Here

    getLuceneDocument().add( (IndexableField) toSerializable( instanceAsByte, loader ) );
  }


  @Override
  public void addIntNumericField(int value, String name, int precisionStep, SerializableStore store, boolean indexed, float boost, boolean omitNorms, boolean omitTermFreqAndPositions) {
    final IntField numField = new IntField( name, value, getStore( store ) );
    numField.setBoost( boost );
    getLuceneDocument().add( numField );
  }

View Full Code Here

    doc.add(new Field("autf8", "Lu\uD834\uDD1Ece\uD834\uDD60ne \u0000 \u2620 ab\ud917\udc17cd", customType2));
    doc.add(new Field("utf8", "Lu\uD834\uDD1Ece\uD834\uDD60ne \u0000 \u2620 ab\ud917\udc17cd", customType2));
    doc.add(new Field("content2", "here is more content with aaa aaa aaa", customType2));
    doc.add(new Field("fie\u2C77ld", "field with non-ascii name", customType2));
    // add numeric fields, to test if flex preserves encoding
    doc.add(new IntField("trieInt", id, Field.Store.NO));
    doc.add(new LongField("trieLong", (long) id, Field.Store.NO));
    // add docvalues fields
    doc.add(new NumericDocValuesField("dvByte", (byte) id));
    byte bytes[] = new byte[] {
      (byte)(id >>> 24), (byte)(id >>> 16),(byte)(id >>> 8),(byte)id

View Full Code Here

      if (i%2 == 0) {
        doc.add(newStringField("sparse", String.valueOf(i), Field.Store.NO));
      }


      if (i%2 == 0) {
        doc.add(new IntField("numInt", i, Field.Store.NO));
      }


      // sometimes skip the field:
      if (random().nextInt(40) != 17) {
        unicodeStrings[i] = generateString(i);

View Full Code Here

    Directory dir = newDirectory();
    IndexWriterConfig cfg = newIndexWriterConfig(TEST_VERSION_CURRENT, new MockAnalyzer(random()));
    cfg.setMergePolicy(newLogMergePolicy());
    RandomIndexWriter iw = new RandomIndexWriter(random(), dir);
    Document doc = new Document();
    IntField field = new IntField("f", 0, Store.YES);
    doc.add(field);
    final int[] values = new int[_TestUtil.nextInt(random(), 1, 10)];
    for (int i = 0; i < values.length; ++i) {
      final int v;
      switch (random().nextInt(10)) {
        case 0:
          v = Integer.MIN_VALUE;
          break;
        case 1:
          v = 0;
          break;
        case 2:
          v = Integer.MAX_VALUE;
          break;
        default:
          v = _TestUtil.nextInt(random(), -10, 10);
          break;
      }
      values[i] = v;
      if (v == 0 && random().nextBoolean()) {
        // missing
        iw.addDocument(new Document());
      } else {
        field.setIntValue(v);
        iw.addDocument(doc);
      }
    }
    iw.forceMerge(1);
    final DirectoryReader reader = iw.getReader();

View Full Code Here

      doc.add(sort3);
      docNoGroup.add(sort3);
      Field content = newTextField("content", "", Field.Store.NO);
      doc.add(content);
      docNoGroup.add(content);
      IntField id = new IntField("id", 0, Field.Store.NO);
      doc.add(id);
      docNoGroup.add(id);
      final GroupDoc[] groupDocs = new GroupDoc[numDocs];
      for (int i = 0; i < numDocs; i++) {
        final BytesRef groupValue;
        if (random().nextInt(24) == 17) {
          // So we test the "doc doesn't have the group'd
          // field" case:
          groupValue = null;
        } else {
          groupValue = groups.get(random().nextInt(groups.size()));
        }


        final GroupDoc groupDoc = new GroupDoc(
            i,
            groupValue,
            groups.get(random().nextInt(groups.size())),
            groups.get(random().nextInt(groups.size())),
            new BytesRef(String.format(Locale.ROOT, "%05d", i)),
            contentStrings[random().nextInt(contentStrings.length)]
        );


        if (VERBOSE) {
          System.out.println("  doc content=" + groupDoc.content + " id=" + i + " group=" + (groupDoc.group == null ? "null" : groupDoc.group.utf8ToString()) + " sort1=" + groupDoc.sort1.utf8ToString() + " sort2=" + groupDoc.sort2.utf8ToString() + " sort3=" + groupDoc.sort3.utf8ToString());
        }


        groupDocs[i] = groupDoc;
        if (groupDoc.group != null) {
          group.setStringValue(groupDoc.group.utf8ToString());
          if (canUseIDV) {
            valuesField.setBytesValue(new BytesRef(groupDoc.group.utf8ToString()));
          }
        }
        sort1.setStringValue(groupDoc.sort1.utf8ToString());
        sort2.setStringValue(groupDoc.sort2.utf8ToString());
        sort3.setStringValue(groupDoc.sort3.utf8ToString());
        content.setStringValue(groupDoc.content);
        id.setIntValue(groupDoc.id);
        if (groupDoc.group == null) {
          w.addDocument(docNoGroup);
        } else {
          w.addDocument(doc);
        }

View Full Code Here

      } else {
        // int/long
        if (random().nextBoolean()) {
          final int i = random().nextInt();
          answer = Integer.valueOf(i);
          nf = new IntField("nf", i, Field.Store.NO);
          sf = new StoredField("nf", i);
          typeAnswer = NumericType.INT;
        } else {
          final long l = random().nextLong();
          answer = Long.valueOf(l);
          nf = new LongField("nf", l, Field.Store.NO);
          sf = new StoredField("nf", l);
          typeAnswer = NumericType.LONG;
        }
      }
      doc.add(nf);
      doc.add(sf);
      answers[id] = answer;
      typeAnswers[id] = typeAnswer;
      FieldType ft = new FieldType(IntField.TYPE_STORED);
      ft.setNumericPrecisionStep(Integer.MAX_VALUE);
      doc.add(new IntField("id", id, ft));
      w.addDocument(doc);
    }
    final DirectoryReader r = w.getReader();
    w.close();

View Full Code Here


    List<Field> fields = Arrays.asList(
        new Field("bytes", bytes, ft),
        new Field("string", string, ft),
        new LongField("long", l, Store.YES),
        new IntField("int", i, Store.YES),
        new FloatField("float", f, Store.YES),
        new DoubleField("double", d, Store.YES)
    );


    for (int k = 0; k < 100; ++k) {

View Full Code Here

0 1 2 3 4 5 6 7 8 9

TOP

Related Classes of org.apache.lucene.document.IntField

cc.twittertools.index.IndexStatuses

cc.twittertools.search.indexing.IndexStatuses

cc.wikitools.lucene.IndexWikipediaDump$AddDocumentRunnable

com.bah.lucene.tools.WriteReadPerformanceTest

com.bericotech.clavin.index.IndexDirectoryBuilder

com.browseengine.bobo.test.FacetNotValuesTest

com.foundationdb.server.service.text.IndexedField

com.gitblit.tickets.TicketIndexer

com.mysema.query.lucene.LuceneQueryTest

com.stratio.cassandra.index.schema.ColumnMapperInteger

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.