Examples of javax.swing.JRootPane

javax.swing.JRootPane
oracle.com/javase/tutorial/uiswing/components/rootpane.html">How to Use Root Panes, a section in The Java Tutorial.
The following image shows the relationships between the classes that use root panes.
The "heavyweight" components (those that delegate to a peer, or native component on the host system) are shown with a darker, heavier box. The four heavyweight JFC/Swing containers (JFrame, JDialog, JWindow, and JApplet) are shown in relation to the AWT classes they extend. These four components are the only heavyweight containers in the Swing library. The lightweight container JInternalFrame is also shown. All five of these JFC/Swing containers implement the RootPaneContainer interface, and they all delegate their operations to a JRootPane (shown with a little "handle" on top).
Note: The JComponent method getRootPane can be used to obtain the JRootPane that contains a given component.

The diagram at right shows the structure of a JRootPane. A JRootpane is made up of a glassPane, an optional menuBar, and a contentPane. (The JLayeredPane manages the menuBar and the contentPane.) The glassPane sits over the top of everything, where it is in a position to intercept mouse movements. Since the glassPane (like the contentPane) can be an arbitrary component, it is also possible to set up the glassPane for drawing. Lines and images on the glassPane can then range over the frames underneath without being limited by their boundaries.
Although the menuBar component is optional, the layeredPane, contentPane, and glassPane always exist. Attempting to set them to null generates an exception.
To add components to the JRootPane (other than the optional menu bar), you add the object to the contentPane of the JRootPane, like this:
```
 rootPane.getContentPane().add(child); 
```
The same principle holds true for setting layout managers, removing components, listing children, etc. All these methods are invoked on the contentPane instead of on the JRootPane.
Note: The default layout manager for the contentPane is a BorderLayout manager. However, the JRootPane uses a custom LayoutManager. So, when you want to change the layout manager for the components you added to a JRootPane, be sure to use code like this:
```
 rootPane.getContentPane().setLayout(new BoxLayout()); 
```
If a JMenuBar component is set on the JRootPane, it is positioned along the upper edge of the frame. The contentPane is adjusted in location and size to fill the remaining area. (The JMenuBar and the contentPane are added to the layeredPane component at the JLayeredPane.FRAME_CONTENT_LAYER layer.)
The layeredPane is the parent of all children in the JRootPane -- both as the direct parent of the menu and the grandparent of all components added to the contentPane. It is an instance of JLayeredPane, which provides the ability to add components at several layers. This capability is very useful when working with menu popups, dialog boxes, and dragging -- situations in which you need to place a component on top of all other components in the pane.
The glassPane sits on top of all other components in the JRootPane. That provides a convenient place to draw above all other components, and makes it possible to intercept mouse events, which is useful both for dragging and for drawing. Developers can use setVisible on the glassPane to control when the glassPane displays over the other children. By default the glassPane is not visible.
The custom LayoutManager used by JRootPane ensures that:
1. The glassPane fills the entire viewable area of the JRootPane (bounds - insets).
2. The layeredPane fills the entire viewable area of the JRootPane. (bounds - insets)
3. The menuBar is positioned at the upper edge of the layeredPane.
4. The contentPane fills the entire viewable area, minus the menuBar, if present.
Any other views in the JRootPane view hierarchy are ignored.
If you replace the LayoutManager of the JRootPane, you are responsible for managing all of these views. So ordinarily you will want to be sure that you change the layout manager for the contentPane rather than for the JRootPane itself!
The painting architecture of Swing requires an opaque JComponent to exist in the containment hierarchy above all other components. This is typically provided by way of the content pane. If you replace the content pane, it is recommended that you make the content pane opaque by way of setOpaque(true). Additionally, if the content pane overrides paintComponent, it will need to completely fill in the background in an opaque color in paintComponent.
Warning: Swing is not thread safe. For more information see Swing's Threading Policy.
Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications running the same version of Swing. As of 1.4, support for long term storage of all JavaBeans™ has been added to the java.beans package. Please see {@link java.beans.XMLEncoder}. @see JLayeredPane @see JMenuBar @see JWindow @see JFrame @see JDialog @see JApplet @see JInternalFrame @see JComponent @see BoxLayout @see Mixing Heavy and Light Components @author David Kloba

      setDropStatus(JInternalFramePainter.DROPPING_PERMITTED);
      return true;
    } else{
      if(hasMenuBar()){
        JInternalFrame jif = (JInternalFrame) adaptable.getWidget();
        JRootPane rootPane = jif.getRootPane(); 
        p=SwingUtilities.convertPoint(rootPane, p, adaptable.getContentPane());
      }
      return getContentOperation().dragEnter(p);
    }
  }

View Full Code Here

      setDropStatus(JInternalFramePainter.NOOP);
      return true;
    } else{
      if(hasMenuBar()){
        JInternalFrame jif = (JInternalFrame) adaptable.getWidget();
        JRootPane rootPane = jif.getRootPane(); 
        p=SwingUtilities.convertPoint(rootPane, p, adaptable.getContentPane());
      }
      return getContentOperation().dragExit(p);
    }
  }

View Full Code Here

      setDropStatus(JInternalFramePainter.NOOP);
      return true;
    } else{
      if(hasMenuBar()){
        JInternalFrame jif = (JInternalFrame) adaptable.getWidget();
        JRootPane rootPane = jif.getRootPane(); 
        p=SwingUtilities.convertPoint(rootPane, p, adaptable.getContentPane());
      }
      return getContentOperation().drop(p);
    }
  }

View Full Code Here

    public TestFrame(TestHarness h)
    {
      super("TestFrame");
      try
  {
    setRootPane(new JRootPane());
    h.check(true, "Root pane changed successfully.");
  }
      catch (IllegalArgumentException e)
  {
    h.debug(e);

View Full Code Here


  public void test(TestHarness harness)
  {
    // This test checks that if an IllegalComponentStateException is 
    // thrown if the layered pane parameter is null.
    JRootPane rootPane = new JRootPane();
    boolean fail = false;
    try
      {
        rootPane.setLayeredPane(null);
      }
    catch (IllegalComponentStateException e)
      {
        fail = true;
      }

View Full Code Here

           + "the panel below";
  }


  public Component getTestComponent()
  {
    JRootPane rp = new JRootPane();
    JMenuBar mb = new JMenuBar();
    JMenu menu = new JMenu("Menu");
    final JLabel label =
      new JLabel("The selected menu item should show up here");
    ActionListener l = new ActionListener()
    {
      public void actionPerformed(ActionEvent ev)
      {
        JMenuItem i = (JMenuItem) ev.getSource();
        label.setText(i.getText());
      }
    };
    
    JMenuItem item1 = new JMenuItem("MenuItem 1");
    item1.addActionListener(l);
    JMenuItem item2 = new JMenuItem("MenuItem 2");
    item2.addActionListener(l);
    JMenuItem item3 = new JMenuItem("MenuItem 3");
    item3.addActionListener(l);
    menu.add(item1);
    menu.add(item2);
    menu.add(item3);
    mb.add(menu);
    rp.setJMenuBar(mb);
    rp.getContentPane().add(label);
    return rp;
  }

View Full Code Here

   * @param harness
   */
  private void testWithBorder(TestHarness harness)
  {
    harness.checkPoint("withBorder");
    JRootPane rp = new JRootPane();
    rp.setBorder(BorderFactory.createEmptyBorder(10, 10, 10, 10));
    rp.setSize(100, 100);
    rp.getLayout().layoutContainer(rp);
    Insets i = rp.getInsets();


    // Check the glass pane.
    Component gp = rp.getGlassPane();
    harness.check(gp.getBounds(),
                  new Rectangle(i.left, i.right,
                                rp.getWidth() - i.left - i.right,
                                rp.getHeight() - i.top - i.bottom));
    // Check the layered pane.
    Component lp = rp.getLayeredPane();
    harness.check(lp.getBounds(),
                  new Rectangle(i.left, i.right,
                                rp.getWidth() - i.left - i.right,
                                rp.getHeight() - i.top - i.bottom));


    // Check the content pane.
    Component cp = rp.getContentPane();
    harness.check(cp.getBounds(),
                  new Rectangle(0, 0, rp.getWidth() - i.left - i.right,
                                rp.getHeight() - i.top - i.bottom));
  }

View Full Code Here

public class getLayoutAlignmentY implements Testlet
{


  public void test(TestHarness harness)
  {
    JRootPane rp = new JRootPane();
    LayoutManager2 lm2 = (LayoutManager2) rp.getLayout();


    // Check for the value when nothing is touched.
    harness.check(lm2.getLayoutAlignmentY(rp), 0.0F);


    // Setting the root pane's alignmentY doesn't change anything.
    rp.setAlignmentY(0.5F);
    harness.check(lm2.getLayoutAlignmentY(rp), 0.0F);


    // Setting the content pane's alignmentY doesn't change anything.
    ((JComponent) rp.getContentPane()).setAlignmentY(0.5F);
    harness.check(lm2.getLayoutAlignmentY(rp), 0.0F);


    // Setting the glass pane's alignmentY doesn't change anything.
    ((JComponent) rp.getGlassPane()).setAlignmentY(0.5F);
    harness.check(lm2.getLayoutAlignmentY(rp), 0.0F);


    // Setting the layered pane's alignmentY doesn't change anything.
    ((JComponent) rp.getLayeredPane()).setAlignmentY(0.5F);
    harness.check(lm2.getLayoutAlignmentY(rp), 0.0F);
  }

View Full Code Here

   *
   * @param h the test harness to use
   */
  private void testInvalidLayout(TestHarness h)
  {
    JRootPane rp = new JRootPane();
    LayoutManager l = rp.getLayout();
    JPanel p = new JPanel();
    p.setPreferredSize(new Dimension(100, 100));
    rp.setContentPane(p);
    h.check(l.preferredLayoutSize(rp), new Dimension(100, 100));
    p.setPreferredSize(new Dimension(200, 200));
    h.check(l.preferredLayoutSize(rp), new Dimension(200, 200));
  }

View Full Code Here

public class getLayoutAlignmentX implements Testlet
{


  public void test(TestHarness harness)
  {
    JRootPane rp = new JRootPane();
    LayoutManager2 lm2 = (LayoutManager2) rp.getLayout();


    // Check for the value when nothing is touched.
    harness.check(lm2.getLayoutAlignmentX(rp), 0.0F);


    // Setting the root pane's alignmentX doesn't change anything.
    rp.setAlignmentX(0.5F);
    harness.check(lm2.getLayoutAlignmentX(rp), 0.0F);


    // Setting the content pane's alignmentX doesn't change anything.
    ((JComponent) rp.getContentPane()).setAlignmentX(0.5F);
    harness.check(lm2.getLayoutAlignmentX(rp), 0.0F);


    // Setting the glass pane's alignmentX doesn't change anything.
    ((JComponent) rp.getGlassPane()).setAlignmentX(0.5F);
    harness.check(lm2.getLayoutAlignmentX(rp), 0.0F);


    // Setting the layered pane's alignmentX doesn't change anything.
    ((JComponent) rp.getLayeredPane()).setAlignmentX(0.5F);
    harness.check(lm2.getLayoutAlignmentX(rp), 0.0F);
  }

View Full Code Here

0 1 2 3 4 5 6 7 8 9

TOP

Related Classes of javax.swing.JRootPane

be.xtnd.commons.gui.EscapeInternalFrame

be.xtnd.commons.gui.EscapeJFrame

com.bbn.openmap.layer.test.TestLayer

com.eteks.furniturelibraryeditor.swing.FurniturePanel

com.eteks.sweethome3d.applet.AppletApplication

com.eteks.sweethome3d.HomeFramePane

com.eteks.sweethome3d.swing.HomePane

com.l2fprod.gui.plaf.skin.SkinRootPaneUI

com.l2fprod.gui.plaf.skin.SkinRootPaneUI$MetalRootLayout

com.l2fprod.gui.plaf.skin.SkinRootPaneUI$MouseInputHandler

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.