Examples of com.sleepycat.je.Cursor

com.sleepycat.je.Cursor
A database cursor. Cursors are used for operating on collections of records, for iterating over a database, and for saving handles to individual records, so that they can be modified after they have been read.
Cursors which are opened with a transaction instance are transactional cursors and may be used by multiple threads, but only serially. That is, the application must serialize access to the handle. Non-transactional cursors, opened with a null transaction instance, may not be used by multiple threads.

If the cursor is to be used to perform operations on behalf of a transaction, the cursor must be opened and closed within the context of that single transaction.

Once the cursor {@link #close} method has been called, the handle may notbe accessed again, regardless of the {@code close} method's success orfailure, with one exception: the {@code close} method itself may be calledany number of times to simplify error handling.

To obtain a cursor with default attributes:
```
 Cursor cursor = myDatabase.openCursor(txn, null); 
```
To customize the attributes of a cursor, use a CursorConfig object.
```
 CursorConfig config = new CursorConfig(); config.setReadUncommitted(true); Cursor cursor = myDatabase.openCursor(txn, config); 
```
Modifications to the database during a sequential scan will be reflected in the scan; that is, records inserted behind a cursor will not be returned while records inserted in front of a cursor will be returned.

Using Partial DatabaseEntry Parameters

The {@link DatabaseEntry#setPartial DatabaseEntry Partial} property canbe used to optimize in certain cases. This provides varying degrees of performance benefits that depend on the specific operation and use of {@code READ_UNCOMMITTED} isolation, as described below.
When retrieving a record with a {@link Database} or {@link Cursor}method, if only the key is needed by the application then the retrieval of the data item can be suppressed using the Partial property. If {@code setPartial(0, 0, true)} is called for the {@code DatabaseEntry} passed asthe data parameter, the data item will not be returned by the {@code Database} or {@code Cursor} method.
Suppressing the return of the data item potentially has a large performance benefit when the {@code READ_UNCOMMITTED} isolation mode isused. In this case, if the record data is not in the JE cache, it will not be read from disk. The performance benefit is potentially large because random access disk reads may be reduced. Examples are:
- Scanning all records in key order, when the data is not needed and {@code READ_UNCOMMITTED} isolation is acceptable.
- Skipping over records quickly to perform approximate pagination with {@code READ_UNCOMMITTED} isolation.
For other isolation modes ( {@code READ_COMMITTED}, {@code REPEATABLE_READ} and {@code SERIALIZABLE}), the performance benefit is not as significant. In this case, the data item must be read into the JE cache if it is not already present, in order to lock the record. The only performance benefit is that the data will not be copied from the JE cache to the application's entry parameter.

For information on specifying isolation modes, see {@link LockMode}, {@link CursorConfig} and {@link TransactionConfig}.

The Partial property may also be used to retrieve or update only a portion of a data item. This avoids copying the entire record between the JE cache and the application data parameter. However, this feature is not currently fully optimized, since the entire record is always read or written to the database, and the entire record is cached. A partial update may be performed only with {@link Cursor#putCurrent Cursor.putCurrent}.

In limited cases, the Partial property may also be used to retrieve a partial key item. For example, a {@code DatabaseEntry} with a Partialproperty may be passed to {@link #getNext getNext}. However, in practice this has limited value since the entire key is usually needed by the application, and the benefit of copying a portion of the key is generally very small. Partial key items may not be passed to methods that use the key as an input parameter, for example, {@link #getSearchKey getSearchKey}. In general, the usefulness of partial key items is very limited.

    }


    @Override
    public ClosableIterator<Pair<ByteArray, Versioned<byte[]>>> entries(int partition) {
        try {
            Cursor cursor = getBdbDatabase().openCursor(null, null);
            // evict data brought in by the cursor walk right away
            if(this.minimizeScanImpact)
                cursor.setCacheMode(CacheMode.EVICT_BIN);
            return new BdbPartitionEntriesIterator(cursor, partition, this);
        } catch(DatabaseException e) {
            this.bdbEnvironmentStats.reportException(e);
            logger.error(e);
            throw new PersistenceFailureException(e);

View Full Code Here

   * @return iterator for BDBRecords
   * @throws DatabaseException 
   */
  public BDBRecordIterator recordIterator(final String startKey, 
    final boolean forward) throws DatabaseException {
    Cursor cursor = db.openCursor(null, null);
    return new BDBRecordIterator(cursor,startKey,!forward);
  }

View Full Code Here

  public void insertRecords(final Iterator<BDBRecord> itr) {
    OperationStatus status = null;
    try {
      Transaction txn = env.beginTransaction(null, null);
      try {
        Cursor cursor = db.openCursor(txn, null);
        while (itr.hasNext()) {
          BDBRecord record = (BDBRecord) itr.next();
          status = cursor.put(record.getKey(), record.getValue());
          if (status != OperationStatus.SUCCESS) {
            throw new RuntimeException("put() non-success status");
          }
        }
        cursor.close();
        txn.commit();
      } catch (DatabaseException e) {
        if(txn != null) {
          txn.abort();
        }

View Full Code Here


    }


    private List<ConfiguredObjectRecord> loadConfiguredObjects() throws DatabaseException
    {
        Cursor cursor = null;
        List<ConfiguredObjectRecord> results = new ArrayList<ConfiguredObjectRecord>();
        try
        {
            cursor = _configuredObjectsDb.openCursor(null, null);
            DatabaseEntry key = new DatabaseEntry();
            DatabaseEntry value = new DatabaseEntry();
            while (cursor.getNext(key, value, LockMode.RMW) == OperationStatus.SUCCESS)
            {
                ConfiguredObjectRecord configuredObject = ConfiguredObjectBinding.getInstance().entryToObject(value);
                UUID id = UUIDTupleBinding.getInstance().entryToObject(key);
                configuredObject.setId(id);
                results.add(configuredObject);

View Full Code Here

        }
    }


    private void recoverBrokerLinks(final ConfigurationRecoveryHandler.BrokerLinkRecoveryHandler lrh)
    {
        Cursor cursor = null;


        try
        {
            cursor = _linkDb.openCursor(null, null);
            DatabaseEntry key = new DatabaseEntry();
            DatabaseEntry value = new DatabaseEntry();


            while (cursor.getNext(key, value, LockMode.RMW) == OperationStatus.SUCCESS)
            {
                UUID id = UUIDTupleBinding.getInstance().entryToObject(key);
                long createTime = LongBinding.entryToLong(value);
                Map<String,String> arguments = StringMapBinding.getInstance().entryToObject(value);

View Full Code Here


    }


    private void recoverBridges(final ConfigurationRecoveryHandler.BridgeRecoveryHandler brh, final UUID linkId)
    {
        Cursor cursor = null;


        try
        {
            cursor = _bridgeDb.openCursor(null, null);
            DatabaseEntry key = new DatabaseEntry();
            DatabaseEntry value = new DatabaseEntry();


            while (cursor.getNext(key, value, LockMode.RMW) == OperationStatus.SUCCESS)
            {
                UUID id = UUIDTupleBinding.getInstance().entryToObject(key);


                UUID parentId = UUIDTupleBinding.getInstance().entryToObject(value);
                if(parentId.equals(linkId))

View Full Code Here


    private void recoverMessages(MessageStoreRecoveryHandler msrh) throws DatabaseException
    {
        StoredMessageRecoveryHandler mrh = msrh.begin();


        Cursor cursor = null;
        try
        {
            cursor = _messageMetaDataDb.openCursor(null, null);
            DatabaseEntry key = new DatabaseEntry();
            DatabaseEntry value = new DatabaseEntry();
            MessageMetaDataBinding valueBinding = MessageMetaDataBinding.getInstance();


            long maxId = 0;


            while (cursor.getNext(key, value, LockMode.RMW) == OperationStatus.SUCCESS)
            {
                long messageId = LongBinding.entryToLong(key);
                StorableMessageMetaData metaData = valueBinding.entryToObject(value);


                StoredBDBMessage message = new StoredBDBMessage(messageId, metaData, true);

View Full Code Here

    {
        QueueEntryRecoveryHandler qerh = recoveryHandler.begin(this);


        ArrayList<QueueEntryKey> entries = new ArrayList<QueueEntryKey>();


        Cursor cursor = null;
        try
        {
            cursor = _deliveryDb.openCursor(null, null);
            DatabaseEntry key = new DatabaseEntry();
            QueueEntryBinding keyBinding = QueueEntryBinding.getInstance();


            DatabaseEntry value = new DatabaseEntry();
            while (cursor.getNext(key, value, LockMode.RMW) == OperationStatus.SUCCESS)
            {
                QueueEntryKey qek = keyBinding.entryToObject(key);


                entries.add(qek);
            }


            try
            {
                cursor.close();
            }
            finally
            {
                cursor = null;
            }


            for(QueueEntryKey entry : entries)
            {
                UUID queueId = entry.getQueueId();
                long messageId = entry.getMessageId();
                qerh.queueEntry(queueId, messageId);
            }
        }
        catch (DatabaseException e)
        {
            LOGGER.error("Database Error: " + e.getMessage(), e);
            throw e;
        }
        finally
        {
            closeCursorSafely(cursor);
        }


        TransactionLogRecoveryHandler.DtxRecordRecoveryHandler dtxrh = qerh.completeQueueEntryRecovery();


        cursor = null;
        try
        {
            cursor = _xidDb.openCursor(null, null);
            DatabaseEntry key = new DatabaseEntry();
            XidBinding keyBinding = XidBinding.getInstance();
            PreparedTransactionBinding valueBinding = new PreparedTransactionBinding();
            DatabaseEntry value = new DatabaseEntry();


            while (cursor.getNext(key, value, LockMode.RMW) == OperationStatus.SUCCESS)
            {
                Xid xid = keyBinding.entryToObject(key);
                PreparedTransaction preparedTransaction = valueBinding.entryToObject(value);
                dtxrh.dtxRecord(xid.getFormat(),xid.getGlobalId(),xid.getBranchId(),
                                preparedTransaction.getEnqueues(),preparedTransaction.getDequeues());

View Full Code Here

     *
     * @return a list of message ids for messages enqueued for a particular queue
     */
    List<Long> getEnqueuedMessages(UUID queueId) throws AMQStoreException
    {
        Cursor cursor = null;
        try
        {
            cursor = _deliveryDb.openCursor(null, null);


            DatabaseEntry key = new DatabaseEntry();


            QueueEntryKey dd = new QueueEntryKey(queueId, 0);


            QueueEntryBinding keyBinding = QueueEntryBinding.getInstance();
            keyBinding.objectToEntry(dd, key);


            DatabaseEntry value = new DatabaseEntry();


            LinkedList<Long> messageIds = new LinkedList<Long>();


            OperationStatus status = cursor.getSearchKeyRange(key, value, LockMode.DEFAULT);
            dd = keyBinding.entryToObject(key);


            while ((status == OperationStatus.SUCCESS) && dd.getQueueId().equals(queueId))
            {


                messageIds.add(dd.getMessageId());
                status = cursor.getNext(key, value, LockMode.DEFAULT);
                if (status == OperationStatus.SUCCESS)
                {
                    dd = keyBinding.entryToObject(key);
                }
            }


            return messageIds;
        }
        catch (DatabaseException e)
        {
            throw new AMQStoreException("Database error: " + e.getMessage(), e);
        }
        finally
        {
            if (cursor != null)
            {
                try
                {
                    cursor.close();
                }
                catch (DatabaseException e)
                {
                    throw new AMQStoreException("Error closing cursor: " + e.getMessage(), e);
                }

View Full Code Here

      try {
         currentTransaction.beginTransaction(null);
         for (Database db : new Database[]{cacheDb, expiryDb}) {
            long recordCount = ois.readLong();
            log.debugf("clearing and reading %s records from stream", recordCount);
            Cursor cursor = null;
            try {
               cursor = db.openCursor(currentTransaction.getTransaction(), null);
               for (int i = 0; i < recordCount; i++) {
                  byte[] keyBytes = (byte[]) ois.readObject();
                  byte[] dataBytes = (byte[]) ois.readObject();


                  DatabaseEntry key = new DatabaseEntry(keyBytes);
                  DatabaseEntry data = new DatabaseEntry(dataBytes);
                  cursor.put(key, data);
               }
            } finally {
               if (cursor != null) cursor.close();
            }
         }
         completeCurrentTransaction(true);
      } catch (Exception caught) {
         completeCurrentTransaction(false);

View Full Code Here

0 1 2 3 4 5 6 7 8 9

TOP

Related Classes of com.sleepycat.je.Cursor

co.paralleluniverse.galaxy.berkeleydb.BerkeleyDB

com.google.nigori.server.JEDatabase

com.numb3r3.common.db.berkeleydb.BerkeleyDBMap

com.opengamma.financial.temptarget.BerkeleyDBTempTargetRepository$Generation

com.sleepycat.bind.serial.StoredClassCatalog

com.sleepycat.collections.CurrentTransaction

com.sleepycat.collections.DataCursor

com.sleepycat.collections.RangeCursor

com.sleepycat.je.cleaner.CleanerTest

com.sleepycat.je.cleaner.FileSelectionTest

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.

Examples of com.sleepycat.je.Cursor

Using Partial DatabaseEntry Parameters

Related Classes of com.sleepycat.je.Cursor