/*************************************************************************
*
* $RCSfile: GluePointDemo.java,v $
*
* $Revision: 1.5 $
*
* last change: $Author: rt $ $Date: 2005-01-31 16:22:38 $
*
* The Contents of this file are made available subject to the terms of
* the BSD license.
*
* Copyright (c) 2003 by Sun Microsystems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Sun Microsystems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*************************************************************************/
// __________ Imports __________
import com.sun.star.uno.UnoRuntime;
import com.sun.star.lang.XComponent;
import com.sun.star.awt.Point;
import com.sun.star.awt.Size;
import com.sun.star.beans.PropertyValue;
import com.sun.star.beans.XPropertySet;
import com.sun.star.container.XIndexContainer;
import com.sun.star.container.XIdentifierContainer;
import com.sun.star.drawing.Alignment;
import com.sun.star.drawing.EscapeDirection;
import com.sun.star.drawing.GluePoint2;
import com.sun.star.drawing.XShape;
import com.sun.star.drawing.XShapes;
import com.sun.star.drawing.XDrawPage;
import com.sun.star.drawing.XGluePointsSupplier;
// __________ Implementation __________
/** GluePointDemo
@author Sven Jacobi
*/
public class GluePointDemo
{
public static void main( String args[] )
{
XComponent xDrawDoc = null;
try
{
// get the remote office context of a running office (a new office
// instance is started if necessary)
com.sun.star.uno.XComponentContext xOfficeContext = Helper.connect();
// suppress Presentation Autopilot when opening the document
// properties are the same as described for
// com.sun.star.document.MediaDescriptor
PropertyValue[] pPropValues = new PropertyValue[ 1 ];
pPropValues[ 0 ] = new PropertyValue();
pPropValues[ 0 ].Name = "Silent";
pPropValues[ 0 ].Value = new Boolean( true );
xDrawDoc = Helper.createDocument( xOfficeContext,
"private:factory/sdraw", "_blank", 0, pPropValues );
XDrawPage xPage = PageHelper.getDrawPageByIndex( xDrawDoc, 0 );
XShapes xShapes = (XShapes)
UnoRuntime.queryInterface( XShapes.class, xPage );
// create two rectangles
XShape xShape1 = ShapeHelper.createShape( xDrawDoc,
new Point( 15000, 1000 ), new Size( 5000, 5000 ),
"com.sun.star.drawing.RectangleShape" );
XShape xShape2 = ShapeHelper.createShape( xDrawDoc,
new Point( 2000, 15000 ), new Size( 5000, 5000 ),
"com.sun.star.drawing.EllipseShape" );
// and a connector
XShape xConnector = ShapeHelper.createShape( xDrawDoc,
new Point( 0, 0 ),
new Size( 0, 0 ),
"com.sun.star.drawing.ConnectorShape" );
xShapes.add( xShape1 );
xShapes.add( xShape2 );
xShapes.add( xConnector );
XPropertySet xConnectorPropSet = (XPropertySet)
UnoRuntime.queryInterface( XPropertySet.class, xConnector );
// Index value of 0 : the shape is connected at the top
// Index value of 1 : the shape is connected at the left
// Index value of 2 : the shape is connected at the bottom
// Index value of 3 : the shape is connected at the right
int nStartIndex = 3;
int nEndIndex = 1;
// the "StartPosition" or "EndPosition" property needs not to be set
// if there is a shape to connect
xConnectorPropSet.setPropertyValue( "StartShape", xShape1 );
xConnectorPropSet.setPropertyValue( "StartGluePointIndex",
new Integer( nStartIndex ) );
xConnectorPropSet.setPropertyValue( "EndShape", xShape2 );
xConnectorPropSet.setPropertyValue( "EndGluePointIndex",
new Integer( nEndIndex ) );
XGluePointsSupplier xGluePointsSupplier;
XIndexContainer xIndexContainer;
XIdentifierContainer xIdentifierContainer;
GluePoint2 aGluePoint = new GluePoint2();
aGluePoint.IsRelative = false;
aGluePoint.PositionAlignment = Alignment.CENTER;
aGluePoint.Escape = EscapeDirection.SMART;
aGluePoint.IsUserDefined = true;
aGluePoint.Position.X = 0;
aGluePoint.Position.Y = 0;
// create and insert a glue point at shape1
xGluePointsSupplier = (XGluePointsSupplier)
UnoRuntime.queryInterface( XGluePointsSupplier.class, xShape1 );
xIndexContainer = xGluePointsSupplier.getGluePoints();
xIdentifierContainer = (XIdentifierContainer)
UnoRuntime.queryInterface( XIdentifierContainer.class,
xIndexContainer );
int nIndexOfGluePoint1 = xIdentifierContainer.insert( aGluePoint );
// create and insert a glue point at shape2
xGluePointsSupplier = (XGluePointsSupplier)
UnoRuntime.queryInterface( XGluePointsSupplier.class, xShape2 );
xIndexContainer = xGluePointsSupplier.getGluePoints();
xIdentifierContainer = (XIdentifierContainer)
UnoRuntime.queryInterface( XIdentifierContainer.class,
xIndexContainer );
int nIndexOfGluePoint2 = xIdentifierContainer.insert( aGluePoint );
// create and add a connector
XShape xConnector2 = ShapeHelper.createShape( xDrawDoc,
new Point( 0, 0 ),
new Size( 0, 0 ),
"com.sun.star.drawing.ConnectorShape" );
xShapes.add( xConnector2 );
XPropertySet xConnector2PropSet = (XPropertySet)
UnoRuntime.queryInterface( XPropertySet.class, xConnector2 );
xConnector2PropSet.setPropertyValue( "StartShape", xShape1 );
xConnector2PropSet.setPropertyValue( "StartGluePointIndex",
new Integer( nIndexOfGluePoint1 ) );
xConnector2PropSet.setPropertyValue( "EndShape", xShape2 );
xConnector2PropSet.setPropertyValue( "EndGluePointIndex",
new Integer( nIndexOfGluePoint2 ) );
}
catch( Exception ex )
{
System.out.println( ex );
}
System.exit( 0 );
}
}