/*************************************************************************
*
* $RCSfile: UnoDialogSample2.java,v $
*
* $Revision: 1.2 $
*
* last change: $Author: hr $ $Date: 2007/07/31 13:55:50 $
*
* The Contents of this file are made available subject to the terms of
* the BSD license.
*
* Copyright (c) 2003 by Sun Microsystems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Sun Microsystems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*************************************************************************/
import com.sun.star.awt.PushButtonType;
import com.sun.star.awt.XControl;
import com.sun.star.awt.XDialog;
import com.sun.star.awt.XFixedText;
import com.sun.star.awt.XListBox;
import com.sun.star.awt.XWindow;
import com.sun.star.beans.MethodConcept;
import com.sun.star.beans.Property;
import com.sun.star.beans.PropertyValue;
import com.sun.star.beans.XIntrospection;
import com.sun.star.beans.XIntrospectionAccess;
import com.sun.star.beans.XMultiPropertySet;
import com.sun.star.beans.XPropertySet;
import com.sun.star.frame.XComponentLoader;
import com.sun.star.lang.XMultiComponentFactory;
import com.sun.star.lang.XServiceInfo;
import com.sun.star.lang.XTypeProvider;
import com.sun.star.reflection.XIdlMethod;
import com.sun.star.uno.Type;
import com.sun.star.uno.UnoRuntime;
import com.sun.star.uno.XComponentContext;
public class UnoDialogSample2 extends UnoDialogSample {
XIntrospectionAccess m_xIntrospectionAccess = null;
Object m_oUnoObject = null;
// define some constants used to set positions and sizes
// of controls. For further information see
// http://ui.openoffice.org/knowledge/DialogSpecificationandGuidelines.odt
final static int nFixedTextHeight = 8;
final static int nControlMargin = 6;
final static int nDialogWidth = 250;
final static int nDialogHeight = 140;
// the default roadmap width == 80 MAPs
final static int nRoadmapWidth = 80;
final static int nButtonHeight = 14;
final static int nButtonWidth = 50;
public UnoDialogSample2(XComponentContext _xContext, XMultiComponentFactory _xMCF, Object _oUnoObject) {
super(_xContext, _xMCF);
try {
m_oUnoObject = _oUnoObject;
Object o = m_xMCF.createInstanceWithContext("com.sun.star.beans.Introspection", m_xContext);
XIntrospection m_xIntrospection = ( XIntrospection ) UnoRuntime.queryInterface(XIntrospection.class, o );
// the variable m_xIntrospectionAccess offers functionality to access all methods and properties
// of a variable
m_xIntrospectionAccess = m_xIntrospection.inspect(_oUnoObject);
} catch (com.sun.star.uno.Exception ex) {
ex.printStackTrace();
}
}
public static void main(String args[]) {
UnoDialogSample2 oUnoDialogSample2 = null;
try {
XComponentContext xContext = com.sun.star.comp.helper.Bootstrap.bootstrap();
if(xContext != null )
System.out.println("Connected to a running office ...");
XMultiComponentFactory xMCF = xContext.getServiceManager();
PropertyValue[] aPropertyValues = new PropertyValue[]{};
// create an arbitrary Uno-Object - in this case an empty writer document..
Object oDesktop =xMCF.createInstanceWithContext("com.sun.star.frame.Desktop", xContext);
XComponentLoader xComponentLoader = (XComponentLoader) UnoRuntime.queryInterface(XComponentLoader.class, oDesktop);
Object oUnoObject = xComponentLoader.loadComponentFromURL("private:factory/swriter", "_default", 0, aPropertyValues);
// define some coordinates where to position the controls
final int nButtonPosX = (int)((nDialogWidth/2) - (nButtonWidth/2));
final int nButtonPosY = nDialogHeight - nButtonHeight - nControlMargin;
final int nControlPosX = nRoadmapWidth + 2*nControlMargin;
final int nControlWidth = nDialogWidth - 3*nControlMargin - nRoadmapWidth;
final int nListBoxHeight = nDialogHeight - 4*nControlMargin - nButtonHeight;
oUnoDialogSample2 = new UnoDialogSample2(xContext, xMCF, oUnoObject);
oUnoDialogSample2.initialize( new String[] {"Height", "Moveable", "Name","PositionX","PositionY", "Step", "TabIndex","Title","Width"},
new Object[] { new Integer(nDialogHeight), Boolean.TRUE, "Dialog1", new Integer(102),new Integer(41), new Integer(1), new Short((short) 0), "Inspect a Uno-Object", new Integer(nDialogWidth)});
String sIntroLabel = "This Dialog lists information about a given Uno-Object.\nIt offers a view to inspect all suppported servicenames, exported interfaces, methods and properties.";
oUnoDialogSample2.insertMultiLineFixedText(nControlPosX, 27, nControlWidth, 4, 1, sIntroLabel);
// get the data from the UNO object...
String[] sSupportedServiceNames = oUnoDialogSample2.getSupportedServiceNames();
String[] sInterfaceNames = oUnoDialogSample2.getExportedInterfaceNames();
String[] sMethodNames = oUnoDialogSample2.getMethodNames();
String[] sPropertyNames = oUnoDialogSample2.getPropertyNames();
// add controls to the dialog...
oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 2, sSupportedServiceNames);
oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 3, sInterfaceNames);
oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 4, sMethodNames);
oUnoDialogSample2.insertListBox(nControlPosX, nControlMargin, nListBoxHeight, nControlWidth, 5, sPropertyNames);
oUnoDialogSample2.insertButton(oUnoDialogSample2, nButtonPosX, nButtonPosY, nButtonWidth, "~Close", (short) PushButtonType.OK_value);
oUnoDialogSample2.insertHorizontalFixedLine(0, nButtonPosY - nControlMargin - 4, nDialogWidth, "");
// create the windowpeer;
// it must be kept in mind that it must be created after the insertion of the controls
// (see http://qa.openoffice.org/issues/show_bug.cgi?id=75129)
oUnoDialogSample2.createWindowPeer();
// add the roadmap control. Note that the roadmap may not be created before the windowpeer of the dialog exists
// (see http://qa.openoffice.org/issues/show_bug.cgi?id=67369)
oUnoDialogSample2.addRoadmap(oUnoDialogSample2.getRoadmapItemStateChangeListener());
oUnoDialogSample2.insertRoadmapItem(0, true, "Introduction", 1);
oUnoDialogSample2.insertRoadmapItem(1, true, "Supported Services", 2);
oUnoDialogSample2.insertRoadmapItem(2, true, "Interfaces", 3);
oUnoDialogSample2.insertRoadmapItem(3, true, "Methods", 4);
oUnoDialogSample2.insertRoadmapItem(4, true, "Properties", 5);
oUnoDialogSample2.m_xRMPSet.setPropertyValue("CurrentItemID", new Short((short) 1));
oUnoDialogSample2.m_xRMPSet.setPropertyValue("Complete", Boolean.TRUE);
oUnoDialogSample2.xDialog = (XDialog) UnoRuntime.queryInterface(XDialog.class, oUnoDialogSample2.m_xDialogControl);
oUnoDialogSample2.xDialog.execute();
}catch( Exception ex ) {
ex.printStackTrace(System.out);
}
finally{
//make sure always to dispose the component and free the memory!
if (oUnoDialogSample2 != null){
if (oUnoDialogSample2.m_xComponent != null){
oUnoDialogSample2.m_xComponent.dispose();
}
}
}
System.exit( 0 );
}
public String[] getMethodNames() {
String[] sMethodNames = new String[]{};
try {
XIdlMethod[] xIdlMethods = m_xIntrospectionAccess.getMethods(MethodConcept.ALL);
sMethodNames = new String[xIdlMethods.length];
for (int i = 0; i < xIdlMethods.length; i++){
sMethodNames[i] = xIdlMethods[i].getName();
}
}
catch( Exception e ) {
System.err.println( e );
}
return sMethodNames;
}
// returns the names of all supported servicenames of a UNO object
public String[] getSupportedServiceNames() {
String[] sSupportedServiceNames = new String[]{};
// If the Uno-Object supports "com.sun.star.lang.XServiceInfo"
// this will give access to all supported servicenames
XServiceInfo xServiceInfo = ( XServiceInfo ) UnoRuntime.queryInterface( XServiceInfo.class, m_oUnoObject);
if ( xServiceInfo != null ) {
sSupportedServiceNames = xServiceInfo.getSupportedServiceNames();
}
return sSupportedServiceNames;
}
// returns the names of all properties of a UNO object
protected String[] getPropertyNames() {
String[] sPropertyNames = new String[]{};
try {
Property[] aProperties = m_xIntrospectionAccess.getProperties(com.sun.star.beans.PropertyConcept.ATTRIBUTES + com.sun.star.beans.PropertyConcept.PROPERTYSET);
sPropertyNames = new String[aProperties.length];
for (int i = 0; i < aProperties.length; i++){
sPropertyNames[i] = aProperties[i].Name;
}
}
catch( Exception e ) {
System.err.println( e );
}
return sPropertyNames;
}
// returns the names of all exported interfaces of a UNO object
protected String[] getExportedInterfaceNames(){
Type[] aTypes = new Type[]{};
String[] sTypeNames = new String[]{};
// The XTypeProvider interfaces offers access to all exported interfaces
XTypeProvider xTypeProvider = ( XTypeProvider ) UnoRuntime.queryInterface( XTypeProvider.class, m_oUnoObject);
if ( xTypeProvider != null ) {
aTypes = xTypeProvider.getTypes();
sTypeNames = new String[aTypes.length];
for (int i = 0; i < aTypes.length - 1; i++){
sTypeNames[i] = aTypes[i].getTypeName();
}
}
return sTypeNames;
}
public XListBox insertListBox(int _nPosX, int _nPosY, int _nHeight, int _nWidth, int _nStep, String[] _sStringItemList) {
XListBox xListBox = null;
try{
// create a unique name by means of an own implementation...
String sName = createUniqueName(m_xDlgModelNameContainer, "ListBox");
// create a controlmodel at the multiservicefactory of the dialog model...
Object oListBoxModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlListBoxModel");
XMultiPropertySet xLBModelMPSet = (XMultiPropertySet) UnoRuntime.queryInterface(XMultiPropertySet.class, oListBoxModel);
// Set the properties at the model - keep in mind to pass the property names in alphabetical order!
xLBModelMPSet.setPropertyValues(
new String[] {"Dropdown", "Height", "Name", "PositionX", "PositionY", "ReadOnly", "Step", "StringItemList", "Width" } ,
new Object[] {Boolean.FALSE, new Integer(_nHeight), sName, new Integer(_nPosX), new Integer(_nPosY), Boolean.TRUE, new Integer(_nStep), _sStringItemList, new Integer(_nWidth)});
m_xDlgModelNameContainer.insertByName(sName, xLBModelMPSet);
}catch (com.sun.star.uno.Exception ex) {
throw new java.lang.RuntimeException("cannot happen...");
}
return xListBox;
}
public void insertMultiLineFixedText(int _nPosX, int _nPosY, int _nWidth, int _nLineCount, int _nStep, String _sLabel) {
try {
// create a unique name by means of an own implementation...
String sName = createUniqueName(m_xDlgModelNameContainer, "Label");
int nHeight = _nLineCount * nFixedTextHeight;
// create a controlmodel at the multiservicefactory of the dialog model...
Object oFTModel = m_xMSFDialogModel.createInstance("com.sun.star.awt.UnoControlFixedTextModel");
XMultiPropertySet xFTModelMPSet = (XMultiPropertySet) UnoRuntime.queryInterface(XMultiPropertySet.class, oFTModel);
// Set the properties at the model - keep in mind to pass the property names in alphabetical order!
xFTModelMPSet.setPropertyValues(
new String[] {"Height", "Label", "MultiLine", "Name", "PositionX", "PositionY", "Step", "Width"},
new Object[] { new Integer(nHeight), _sLabel, Boolean.TRUE, sName, new Integer(_nPosX), new Integer(_nPosY), new Integer(_nStep), new Integer(_nWidth)});
// add the model to the NameContainer of the dialog model
m_xDlgModelNameContainer.insertByName(sName, oFTModel);
}catch (com.sun.star.uno.Exception ex){
/* perform individual exception handling here.
* Possible exception types are:
* com.sun.star.lang.IllegalArgumentException,
* com.sun.star.lang.WrappedTargetException,
* com.sun.star.container.ElementExistException,
* com.sun.star.beans.PropertyVetoException,
* com.sun.star.beans.UnknownPropertyException,
* com.sun.star.uno.Exception
*/
ex.printStackTrace(System.out);
}
}
}// end of class