Examples of abbot.tester.ComponentLocation

abbot.tester.ComponentLocation
Provides encapsulation of a visible Component-relative location. Hides the specifics location so that ComponentTester primitives (actionClick, actionShowPopup, etc) may be directed to specific elements of substructure on a Component (list rows, tree paths, table cells, substructure values, etc.). "Visible" in this context means currently accessible by the pointer (possibly via scrolling). A hidden node in a collapsed tree path would not be considered visible.
By convention, Point locations are specified with (x,y) notation. Indexed locations should use square brackets, e.g. [i] or [r,c] and value locations should use a quoted String, e.g. '"my value"'. Recorders should use the String value by default for consistency. @see JListLocation @see JTreeLocation @see JTableLocation

    
    // 8. Change observer camera yaw by moving its yaw indicator
    float [][] cameraPoints = observerCamera.getPoints();
    int xYawIndicator = (int)(((40 + (cameraPoints[0][0] + cameraPoints[3][0]) / 2)) * planComponent.getScale());
    int yYawIndicator = (int)(((40 + (cameraPoints[0][1] + cameraPoints[3][1]) / 2)) * planComponent.getScale());
    tester.actionMousePress(planComponent, new ComponentLocation(
        new Point(xYawIndicator, yYawIndicator)));
    tester.actionMouseMove(planComponent, new ComponentLocation(
        new Point(xYawIndicator + 2, yYawIndicator + 2)));
    tester.actionMouseRelease();
    // Check camera yaw angle changed
    assertCoordinatesAndAnglesEqualCameraLocationAndAngles(100 + 1 / planComponent.getScale(), 
        100 + 1 / planComponent.getScale(), 170, 
        2.5156f, (float)Math.PI / 16, home.getCamera());


    // Change observer camera pitch by moving its pitch indicator
    cameraPoints = observerCamera.getPoints();
    int xPitchIndicator = (int)(((40 + (cameraPoints[1][0] + cameraPoints[2][0]) / 2)) * planComponent.getScale());
    int yPitchIndicator = (int)(((40 + (cameraPoints[1][1] + cameraPoints[2][1]) / 2)) * planComponent.getScale());
    tester.actionMousePress(planComponent, new ComponentLocation(
        new Point(xPitchIndicator, yPitchIndicator)));
    tester.actionMouseMove(planComponent, new ComponentLocation(
        new Point(xPitchIndicator + 2, yPitchIndicator + 2)));
    tester.actionMouseRelease();
    // Check camera pitch angle changed
    assertCoordinatesAndAnglesEqualCameraLocationAndAngles(100 + 1 / planComponent.getScale(), 
        100 + 1 / planComponent.getScale(), 170, 
        2.5156f, 0.1639f, home.getCamera());
    
    // 9. Change observer camera location with mouse in 3D view
    tester.actionMousePress(component3D, new ComponentLocation(new Point(10, 10)));
    tester.actionKeyPress(KeyEvent.VK_ALT);
    tester.actionMouseMove(component3D, new ComponentLocation(new Point(10, 20)));
    tester.actionKeyRelease(KeyEvent.VK_ALT);
    tester.actionMouseRelease();
    // Check camera location changed
    assertCoordinatesAndAnglesEqualCameraLocationAndAngles(108.657f, 111.4631f, 170, 
        2.5156f, 0.1639f, home.getCamera());


    // 10. Change observer camera yaw with mouse in 3D view
    tester.actionMousePress(component3D, new ComponentLocation(new Point(10, 20)));
    tester.actionMouseMove(component3D, new ComponentLocation(new Point(20, 20)));
    tester.actionMouseRelease();
    // Check camera yaw changed
    assertCoordinatesAndAnglesEqualCameraLocationAndAngles(108.657f, 111.4631f, 170, 
        2.5656f, 0.1639f, home.getCamera());
    
    // Change camera pitch with mouse in 3D view
    tester.actionMousePress(component3D, new ComponentLocation(new Point(20, 20)));
    tester.actionMouseMove(component3D, new ComponentLocation(new Point(20, 30)));
    tester.actionMouseRelease();
    // Check camera yaw changed
    assertCoordinatesAndAnglesEqualCameraLocationAndAngles(108.657f, 111.4631f, 170, 
        2.5656f, 0.2139f, home.getCamera());

View Full Code Here

    assertLocationAndOrientationEqualPiece(pieceX, pieceY, 0, piece);
    
    // 4. Press mouse button at piece center
    int widthPixel = Math.round(pieceWidth * planComponent.getScale());
    int depthPixel = Math.round(pieceDepth * planComponent.getScale());
    tester.actionMousePress(planComponent, new ComponentLocation( 
        new Point(20 + widthPixel / 2, 20 + depthPixel / 2))); 
    // Drag mouse to (100, 100) from piece center
    tester.actionMousePress(planComponent, new ComponentLocation( 
        new Point(20 + widthPixel / 2 + 100, 20 + depthPixel / 2 + 100))); 
    tester.actionMouseRelease(); 
    // Check piece moved 
    pieceX += 200;
    pieceY += 200;
    assertLocationAndOrientationEqualPiece(pieceX, pieceY, 0, piece);
    
    // 5. Press mouse button at top left point of selected piece 
    tester.actionMousePress(planComponent, 
        new ComponentLocation(new Point(120, 120)));
    // Drag mouse to (-depthPixel / 2 - 1, widthPixel / 2) pixels from piece center
    tester.actionMouseMove(planComponent, new ComponentLocation( 
        new Point(120 + widthPixel / 2 - depthPixel / 2 - 1, 
                  120 + depthPixel / 2 + widthPixel / 2))); 
    tester.actionMouseRelease(); 
    // Check piece angle is 3 * PI / 2 (=-90�)
    assertLocationAndOrientationEqualPiece(
        pieceX, pieceY, (float)Math.PI * 3 / 2, piece);


    // 6. Press mouse button at top left point of selected piece
    tester.actionMousePress(planComponent, new ComponentLocation(
        new Point(120 + widthPixel / 2 - depthPixel / 2, 
                  120 + depthPixel / 2 + widthPixel / 2)));
    // Drag mouse to the previous position plus 1 pixel along x axis
    tester.actionMouseMove(planComponent, new ComponentLocation(
        new Point(121, 120))); 
    // Check piece angle is 0�
    assertLocationAndOrientationEqualPiece(pieceX, pieceY, 0, piece);
    // Press Shift key
    tester.actionKeyPress(KeyEvent.VK_SHIFT);
    // Check piece angle is different from 0�
    assertFalse("Piece orientation shouldn't be magnetized", 
        Math.abs(piece.getAngle()) < 1E-10);
    tester.actionKeyRelease(KeyEvent.VK_SHIFT);    
    tester.actionKeyStroke(planComponent, KeyEvent.VK_ESCAPE);
    tester.actionMouseRelease(); 
    // Check piece angle is 3 * PI / 2 (=-90�)
    assertLocationAndOrientationEqualPiece(
        pieceX, pieceY, (float)Math.PI * 3 / 2, piece);
    
    // 7. Click at point (30, 160) with Shift key depressed 
    tester.actionKeyPress(KeyEvent.VK_SHIFT);
    tester.actionClick(planComponent, 30, 160); 
    tester.actionKeyRelease(KeyEvent.VK_SHIFT);
    // Check selected items contains the piece of furniture and the fifth wall
    List<Selectable> selectedItems = 
        new ArrayList<Selectable>(frame.home.getSelectedItems());
    assertEquals("Wrong selected items count", 2, selectedItems.size());
    assertTrue("Piece of furniture not selected", selectedItems.contains(piece));
    // Remove piece form list to get the selected wall
    selectedItems.remove(piece);
    Wall fifthWall = (Wall)selectedItems.get(0);
    // Check piece and wall coordinates
    assertLocationAndOrientationEqualPiece(
        pieceX, pieceY, (float)Math.PI * 3 / 2, piece);
    assertCoordinatesEqualWallPoints(20, 300, 20, 20, fifthWall);
    
    // 8. Drag and drop mouse to (40, 160)
    Thread.sleep(1000); // Wait 1s to avoid double click
    tester.actionMousePress(planComponent, 
        new ComponentLocation(new Point(30, 160)));
    tester.actionMouseMove(planComponent,  
        new ComponentLocation(new Point(40, 160))); 
    tester.actionMouseRelease(); 
    // Check the piece of furniture moved 20 cm along x axis
    assertLocationAndOrientationEqualPiece(
        pieceX + 20, pieceY, (float)Math.PI * 3 / 2, piece);
    assertCoordinatesEqualWallPoints(40, 300, 40, 20, fifthWall);
    
    // 9. Click twice on undo button
    tester.invokeAndWait(new Runnable() {
         public void run() {
          frame.undoButton.doClick();
          frame.undoButton.doClick();
         }
       });
    // Check piece orientation and location are canceled
    assertLocationAndOrientationEqualPiece(
        pieceX, pieceY, 0f, piece);
    assertCoordinatesEqualWallPoints(20, 300, 20, 20, fifthWall);
    
    // 10. Click twice on redo button
    tester.invokeAndWait(new Runnable() {
        public void run() {
          frame.redoButton.doClick();
          frame.redoButton.doClick();
        }
      });
    // Check piece and wall location was redone
    assertLocationAndOrientationEqualPiece(
        pieceX + 20, pieceY, (float)Math.PI * 3 / 2, piece);
    assertCoordinatesEqualWallPoints(40, 300, 40, 20, fifthWall);
    // Check selected items contains the piece of furniture and the fifth wall
    selectedItems = frame.home.getSelectedItems();
    assertEquals("Wrong selected items count", 
        2, selectedItems.size());
    assertTrue("Piece of furniture not selected", 
        selectedItems.contains(piece));
    assertTrue("Fifth wall not selected", 
        selectedItems.contains(fifthWall));
    
    // 11. Click at point (pieceXPixel + depthPixel / 2, pieceYPixel - widthPixel / 2) 
    //     at width and depth resize point of the piece
    int pieceXPixel = Math.round((piece.getX() + 40) * planComponent.getScale());
    int pieceYPixel = Math.round((piece.getY() + 40) * planComponent.getScale());
    tester.actionClick(planComponent, pieceXPixel + depthPixel / 2, pieceYPixel - widthPixel / 2);
    
    // Check selected items contains only the piece of furniture 
    selectedItems = frame.home.getSelectedItems();
    assertEquals("Wrong selected items count", 1, selectedItems.size());
    assertTrue("Piece of furniture not selected", selectedItems.contains(piece));
    // Drag mouse (4,4) pixels out of piece box with magnetism disabled
    Thread.sleep(1000); // Wait 1s to avoid double click
    tester.actionMousePress(planComponent, new ComponentLocation(new Point(
        pieceXPixel + depthPixel / 2, pieceYPixel - widthPixel / 2)));
    tester.actionKeyPress(KeyEvent.VK_SHIFT);
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(
        pieceXPixel + depthPixel / 2 + 4, pieceYPixel - widthPixel / 2 + 4))); 
    tester.actionMouseRelease();
    tester.actionKeyRelease(KeyEvent.VK_SHIFT);
    // Check piece width and depth were resized (caution : piece angle is oriented at 90�)
    assertDimensionEqualPiece(pieceWidth - 4 / planComponent.getScale(), 
        pieceDepth + 4 / planComponent.getScale(), pieceHeight, piece);


    // 12. Click at point (pieceXPixel + depthPixel / 2, pieceYPixel + widthPixel / 2) 
    //     at height resize point of the piece
    pieceXPixel = Math.round((piece.getX() + 40) * planComponent.getScale());
    pieceYPixel = Math.round((piece.getY() + 40) * planComponent.getScale());
    widthPixel = Math.round((piece.getWidth()) * planComponent.getScale());
    depthPixel = Math.round((piece.getDepth()) * planComponent.getScale());
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(
        pieceXPixel + depthPixel / 2, pieceYPixel + widthPixel / 2)));
    Thread.sleep(1000);
    tester.actionMousePress(planComponent, new ComponentLocation(new Point(
        pieceXPixel + depthPixel / 2, pieceYPixel + widthPixel / 2)));
    // Drag mouse (2,4) pixels 
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(
        pieceXPixel + depthPixel / 2 + 2, pieceYPixel + widthPixel / 2 + 4))); 
    tester.actionMouseRelease();
    // Check piece height was resized 
    assertDimensionEqualPiece(pieceWidth - 4 / planComponent.getScale(), 
        pieceDepth + 4 / planComponent.getScale(), 
        Math.round((pieceHeight - 4 / planComponent.getScale()) * 2) / 2, piece);


    // 13. Click at point (pieceXPixel - depthPixel / 2, pieceYPixel - widthPixel / 2) 
    //     at elevation point of the piece
    float pieceElevation = piece.getElevation();
    tester.actionMousePress(planComponent, new ComponentLocation(new Point(
        pieceXPixel - depthPixel / 2, pieceYPixel - widthPixel / 2)));
    // Drag mouse (2,-4) pixels 
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(
        pieceXPixel - depthPixel / 2 + 2, pieceYPixel - widthPixel / 2 - 4))); 
    tester.actionMouseRelease();
    // Check piece elevation was updated
    assertElevationEqualPiece(pieceElevation + 4 / planComponent.getScale(), piece);


    // 14. Click three times on undo button
    tester.invokeAndWait(new Runnable() {
        public void run() {
          frame.undoButton.doClick();
          frame.undoButton.doClick();
          frame.undoButton.doClick();
        }
      });
    // Check piece dimension and elevation are canceled
    assertDimensionEqualPiece(pieceWidth, pieceDepth, pieceHeight, piece);
    assertElevationEqualPiece(pieceElevation, piece);
    
    // Build an ordered list of dimensions added to home
    final ArrayList<DimensionLine> orderedDimensionLines = new ArrayList<DimensionLine>();
    frame.home.addDimensionLinesListener(new CollectionListener<DimensionLine>() {
      public void collectionChanged(CollectionEvent<DimensionLine> ev) {
        if (ev.getType() == CollectionEvent.Type.ADD) {
          orderedDimensionLines.add(ev.getItem());
        }
      }
    });
    
    // 15. Use CREATE_DIMENSION_LINES mode
    tester.invokeAndWait(new Runnable() {
        public void run() {
          frame.createDimensionsButton.doClick();
        }
      });
    // Draw a dimension in plan
    tester.actionClick(planComponent, 280, 81);
    tester.actionClick(planComponent, 281, 169, InputEvent.BUTTON1_MASK, 2);
    // Draw a dimension with extension lines
    tester.actionClick(planComponent, 41, 175);
    tester.actionClick(planComponent, 269, 175);
    tester.actionClick(planComponent, 280, 185);
    // Check 2 dimensions were added to home plan
    assertEquals("Wrong dimensions count", 2, frame.home.getDimensionLines().size());
    // Check one dimension is selected
    assertEquals("Wrong selection", 1, frame.home.getSelectedItems().size());
    assertEquals("Selection doesn't contain the second dimension", 
        frame.home.getSelectedItems().get(0), orderedDimensionLines.get(1));
    // Check the size of the created dimension lines
    DimensionLine firstDimensionLine = orderedDimensionLines.get(0);
    assertEqualsDimensionLine(520, 122, 520, 298, 0, firstDimensionLine);
    assertEqualsDimensionLine(42, 310, 498, 310, 20, orderedDimensionLines.get(1));
    
    // 16. Select the first dimension line
    tester.click(frame.selectButton);
    tester.actionClick(planComponent, 280, 90);
    assertEquals("Wrong selection", 1, frame.home.getSelectedItems().size());
    assertEquals("Selection doesn't contain the first dimension", 
        frame.home.getSelectedItems().get(0), firstDimensionLine);
    // Move its end point to (330, 167)
    tester.actionMousePress(planComponent, new ComponentLocation(new Point(280, 167)));
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(320, 167)));
    // Check its coordinates while Shift key isn't pressed (with magnetism)
    assertEqualsDimensionLine(520, 122, 567.105f, 297.7985f, 0, firstDimensionLine);
    // Check its length with magnetism 
    float firstDimensionLineLength = (float)Point2D.distance(
        firstDimensionLine.getXStart(), firstDimensionLine.getYStart(), 
        firstDimensionLine.getXEnd(), firstDimensionLine.getYEnd());
    assertTrue("Incorrect length 182 " + firstDimensionLineLength, 
        Math.abs(182 - firstDimensionLineLength) < 1E-4);
    // Press Shift key
    tester.actionKeyPress(KeyEvent.VK_SHIFT);
    // Check its coordinates while Shift key is pressed (with no magnetism)
    assertEqualsDimensionLine(520, 122, 600, 298, 0, firstDimensionLine);
    // Release Shift key and mouse button
    tester.actionKeyRelease(KeyEvent.VK_SHIFT);    
    tester.actionMouseRelease();
    assertEqualsDimensionLine(520, 122, 567.105f, 297.7985f, 0, firstDimensionLine);
    
    // 17. Click three times on undo button
    tester.invokeAndWait(new Runnable() {
        public void run() {
          frame.undoButton.doClick();
          frame.undoButton.doClick();
          frame.undoButton.doClick();
        }
      });
    // Check home doesn't contain any dimension
    assertEquals("Home dimensions set isn't empty", 0, frame.home.getDimensionLines().size());
    
    // 18. Click twice on redo button
    tester.invokeAndWait(new Runnable() {
        public void run() {
          frame.redoButton.doClick();
          frame.redoButton.doClick();
        }
      });
    // Check the size of the created dimension lines
    assertEqualsDimensionLine(520, 122, 520, 298f, 0, firstDimensionLine);
    assertEqualsDimensionLine(42, 310, 498, 310, 20, orderedDimensionLines.get(1));
    // Click again on redo button
    tester.invokeAndWait(new Runnable() {
        public void run() {
          frame.redoButton.doClick();
        }
      });
    // Check the first dimension is selected
    assertEquals("Wrong selection", 1, frame.home.getSelectedItems().size());
    assertEquals("Selection doesn't contain the first dimension", 
        frame.home.getSelectedItems().get(0), firstDimensionLine);
    // Check the coordinates of the first dimension 
    assertEqualsDimensionLine(520, 122, 567.105f, 297.7985f, 0, firstDimensionLine);
    
    // 19. Select two walls, the piece and a dimension line
    tester.actionMousePress(planComponent, new ComponentLocation(new Point(20, 100)));
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(200, 200)));
    tester.actionMouseRelease();
    // Check selection
    selectedItems = frame.home.getSelectedItems();
    assertEquals("Selection doesn't contain 4 items", 4, selectedItems.size());    
    int wallsCount = frame.home.getWalls().size();
    int furnitureCount = frame.home.getFurniture().size();
    int dimensionLinesCount = frame.home.getDimensionLines().size();
    HomePieceOfFurniture selectedPiece = Home.getFurnitureSubList(selectedItems).get(0);
    pieceX = selectedPiece.getX();
    pieceY = selectedPiece.getY();
    // Start items duplication 
    tester.actionKeyPress(OperatingSystem.isMacOSX() ? KeyEvent.VK_ALT : KeyEvent.VK_CONTROL);
    tester.actionMousePress(planComponent, new ComponentLocation(new Point(50, 170)));
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(51, 170)));
    // Check selection changed
    assertFalse("Selection didn't change", selectedItems.equals(frame.home.getSelectedItems()));
    assertEquals("Selection doesn't contain 4 items", 4, frame.home.getSelectedItems().size());    
    assertEquals("No new wall", wallsCount + 2, frame.home.getWalls().size());    
    assertEquals("No new piece", furnitureCount + 1, frame.home.getFurniture().size());    
    assertEquals("No new dimension lines", dimensionLinesCount + 1, frame.home.getDimensionLines().size());
    
    // 20. Duplicate and move items
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(70, 200)));
    // Check the piece moved and the original piece didn't move 
    HomePieceOfFurniture movedPiece = 
        Home.getFurnitureSubList(frame.home.getSelectedItems()).get(0);
    assertLocationAndOrientationEqualPiece(pieceX + 20 / planComponent.getScale(), 
        pieceY + 30 / planComponent.getScale(), selectedPiece.getAngle(), movedPiece);
    assertLocationAndOrientationEqualPiece(pieceX, pieceY, selectedPiece.getAngle(), selectedPiece);
    
    // 21. Release Alt key
    tester.actionKeyRelease(OperatingSystem.isMacOSX() ? KeyEvent.VK_ALT : KeyEvent.VK_CONTROL);
    // Check original items replaced duplicated items
    assertTrue("Original items not selected", selectedItems.equals(frame.home.getSelectedItems()));
    assertLocationAndOrientationEqualPiece(pieceX + 20 / planComponent.getScale(), 
        pieceY + 30 / planComponent.getScale(), selectedPiece.getAngle(), selectedPiece);
    assertFalse("Duplicated piece still in home", frame.home.getFurniture().contains(movedPiece));
    // Press Alt key again 
    tester.actionKeyPress(OperatingSystem.isMacOSX() ? KeyEvent.VK_ALT : KeyEvent.VK_CONTROL);
    // Check the duplicated piece moved and the original piece moved back to its original location 
    movedPiece = Home.getFurnitureSubList(frame.home.getSelectedItems()).get(0);
    assertLocationAndOrientationEqualPiece(pieceX + 20 / planComponent.getScale(), 
        pieceY + 30 / planComponent.getScale(), selectedPiece.getAngle(), movedPiece);
    assertLocationAndOrientationEqualPiece(pieceX, pieceY, selectedPiece.getAngle(), selectedPiece);
    // Press Escape key
    tester.actionKeyStroke(KeyEvent.VK_ESCAPE);
    // Check no items where duplicated
    assertTrue("Original items not selected", selectedItems.equals(frame.home.getSelectedItems()));
    assertLocationAndOrientationEqualPiece(pieceX, pieceY, selectedPiece.getAngle(), selectedPiece);
    assertEquals("New walls created", wallsCount, frame.home.getWalls().size());    
    assertEquals("New pieces created", furnitureCount, frame.home.getFurniture().size());    
    assertEquals("New dimension lines created", dimensionLinesCount, frame.home.getDimensionLines().size());
    tester.actionMouseRelease();
    
    // 22. Duplicate items
    tester.actionMousePress(planComponent, new ComponentLocation(new Point(50, 170)));
    tester.actionMouseMove(planComponent, new ComponentLocation(new Point(50, 190)));
    tester.actionMouseRelease();
    tester.actionKeyRelease(OperatingSystem.isMacOSX() ? KeyEvent.VK_ALT : KeyEvent.VK_CONTROL);
    // Check the duplicated piece moved and the original piece didn't move
    List<Selectable> movedItems = frame.home.getSelectedItems();
    assertEquals("Selection doesn't contain 4 items", 4, movedItems.size());

View Full Code Here

    // Check only Copy action is enabled
    assertActionsEnabled(controller, false, true, false, false);
    
    // 3. Drag and drop selected piece in tree to point (120, 120) in plan component
    Rectangle selectedRowBounds = catalogTree.getRowBounds(1);
    tester.actionDrag(catalogTree, new ComponentLocation( 
        new Point(selectedRowBounds.x, selectedRowBounds.y)));
    tester.actionDrop(planComponent, new ComponentLocation( 
        new Point(120, 120))); 
    tester.waitForIdle();
    // Check a piece was added to home
    assertEquals("Wrong piece count in home", 1, home.getFurniture().size());
    // Check top left corner of the piece is at (200, 200)

View Full Code Here

    
    // 6. Use SELECTION mode
    tester.click(frame.modeButton); 
    // Drag and drop cursor from (200, 100) to (300, 180)
    tester.actionMousePress(planComponent, 
        new ComponentLocation(new Point(200, 100))); 
    tester.actionMouseMove(planComponent, 
        new ComponentLocation(new Point(300, 180))); 
    tester.actionMouseRelease(); 
    // Check the selected walls are the second and third ones
    assertSelectionContains(frame.home, wall2, wall3);


    // 7. Press twice right arrow key     
    tester.actionKeyStroke(KeyEvent.VK_RIGHT);
    tester.actionKeyStroke(KeyEvent.VK_RIGHT);
    // Check the 4 walls coordinates are (20, 20), (504, 20), (504, 300), (24, 300) 
    assertCoordinatesEqualWallPoints(20, 20, 504, 20, wall1);
    assertCoordinatesEqualWallPoints(504, 20, 504, 300, wall2);
    assertCoordinatesEqualWallPoints(504, 300, 24, 300, wall3);
    assertCoordinatesEqualWallPoints(20, 20, 24, 300, wall4);


    // 8. Click at (272, 40) with Shift key depressed
    tester.actionKeyPress(KeyEvent.VK_SHIFT);
    tester.actionClick(planComponent, 272, 40);
    tester.actionKeyRelease(KeyEvent.VK_SHIFT);
    // Check the second wall was removed from selection
    assertSelectionContains(frame.home, wall3);


     // 9. Drag cursor from (50, 30) to (50, 50) 
    tester.actionMousePress(planComponent, 
        new ComponentLocation(new Point(50, 30)));
    tester.actionMouseMove(planComponent, 
        new ComponentLocation(new Point(50, 50)));
    // Check first wall is selected and that it moved
    assertSelectionContains(frame.home, wall1);
    assertCoordinatesEqualWallPoints(20, 60, 504, 60, wall1);
    // Lose focus 
    tester.actionKeyStroke(KeyEvent.VK_TAB);
    // Check the wall didn't move at end
    assertCoordinatesEqualWallPoints(20, 20, 504, 20, wall1);


    // 10. Click 6 times on undo button
    for (int i = 0; i < 6; i++) {
      tester.invokeAndWait(new Runnable() {
          public void run() {
            frame.undoButton.doClick();
          }
        });
    }
    // Check home doesn't contain any wall
    assertHomeContains(frame.home);
    
    // 11. Click 6 times on redo button
    for (int i = 0; i < 6; i++) {
      tester.invokeAndWait(new Runnable() {
          public void run() {
            frame.redoButton.doClick();
          }
        });
    }
    // Check plan contains the four wall
    assertHomeContains(frame.home, wall1, wall2, wall3, wall4);
    //  Check they are joined to each other end point
    assertWallsAreJoined(wall4, wall1, wall2); 
    assertWallsAreJoined(wall1, wall2, wall3); 
    assertWallsAreJoined(wall2, wall3, wall4); 
    assertWallsAreJoined(wall1, wall4, wall3); 
    // Check the second and the third wall are selected
    assertSelectionContains(frame.home, wall2, wall3);
    
    // 12. Reverse directions of selected walls
    float xStartWall2 = wall2.getXStart();
    float yStartWall2 = wall2.getYStart();
    float xStartWall3 = wall3.getXStart();
    float yStartWall3 = wall3.getYStart();
    float xEndWall3 = wall3.getXEnd();
    float yEndWall3 = wall3.getYEnd();
    tester.invokeAndWait(new Runnable() {
        public void run() {
          frame.reverseDirectionButton.doClick();
        }
      });
    // Check the second and the third wall are still selected
    assertSelectionContains(frame.home, wall2, wall3);
    // Check wall2 and wall3 were reserved
    assertCoordinatesEqualWallPoints(xStartWall3, yStartWall3, xStartWall2, yStartWall2, wall2);
    assertCoordinatesEqualWallPoints(xEndWall3, yEndWall3, xStartWall3, yStartWall3, wall3);
    assertWallsAreJoined(wall3, wall2, wall1); 
    assertWallsAreJoined(wall4, wall3, wall2);
    
    // 13. Select first wall
    tester.actionClick(planComponent, 100, 100); // Give focus first
    tester.actionClick(planComponent, 40, 30);
    // Drag cursor from (30, 30) to (50, 50) with shift key pressed
    tester.actionMousePress(planComponent, 
        new ComponentLocation(new Point(30, 30))); 
    tester.actionMouseMove(planComponent, 
        new ComponentLocation(new Point(50, 50))); 
    tester.actionKeyPress(KeyEvent.VK_SHIFT);
    tester.waitForIdle();
    tester.actionMouseRelease(); 
    tester.actionKeyRelease(KeyEvent.VK_SHIFT);
    // Check wall start point moved to (60, 60)

View Full Code Here

    assertSelectionContains(frame.home, wall1, wall2, wall3);
    
    // 3. Mix mouse and keyboard to create other walls
    tester.actionClick(planComponent, 300, 200);
    tester.actionMouseMove(planComponent, 
        new ComponentLocation(new Point(310, 200)));
    tester.actionKeyStroke(KeyEvent.VK_ENTER);
    // Enter the length and the angle of the wall
    tester.actionKeyString("100");
    tester.actionKeyStroke(KeyEvent.VK_TAB);
    tester.actionKeyString("315");
    tester.actionKeyStroke(KeyEvent.VK_ENTER);
    // Create 3 walls with same length
    Thread.sleep(500);
    tester.actionKeyStroke(KeyEvent.VK_ENTER);
    Thread.sleep(500);
    tester.actionKeyStroke(KeyEvent.VK_ENTER);
    // Take control with mouse
    tester.actionMouseMove(planComponent, 
        new ComponentLocation(new Point(200, 200)));
    tester.actionKeyPress(KeyEvent.VK_SHIFT);
    Wall wall7 = orderedWalls.get(7);
    assertCoordinatesEqualWallPoints(wall7.getXStart(), wall7.getYStart(), 
        planComponent.convertXPixelToModel(200), 
        planComponent.convertYPixelToModel(200), wall7);

View Full Code Here

        String[] args = action.getArguments();
        assertEquals("Wrong component reference ID",
                     ref.getID(), args[0]);
        Object[] params = action.getParameters();
        assertEquals("Second parameter should be a ComponentLocation",
                     new ComponentLocation(new Point(0, 0)), params[1]);
    }

View Full Code Here

    }


    /** Special case for OSX tab selection from popup menu. */
    protected Step createMenuSelection(Component menuItem) {
        ComponentReference ref = getResolver().addComponent(tabbedPane);
        ComponentLocation loc =
            new JTabbedPaneLocation(((JMenuItem)menuItem).getText());
        Step step = new Action(getResolver(),
                               null, "actionSelectTab",
                               new String[] {
                                   ref.getID(), loc.toString(),
                               });
        return step;
    }

View Full Code Here

TOP

Related Classes of abbot.tester.ComponentLocation

abbot.editor.recorder.JTabbedPaneRecorder

abbot.script.ActionTest

com.eteks.sweethome3d.junit.HomeCameraTest

com.eteks.sweethome3d.junit.PlanComponentTest

com.eteks.sweethome3d.junit.PlanComponentWithFurnitureTest

com.eteks.sweethome3d.junit.TransferHandlerTest

java.util.StringTokenizer

All source code are property of their respective owners. Java is a trademark of Sun Microsystems, Inc and owned by ORACLE Inc. Contact coftware#gmail.com.